We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC magnetic contactor with screw terminals and DIN rail mounting

Eaton

Eaton XTCE009B10C IEC Magnetic Contactor 9 A 480 V AC 3 P Non-Reversing

SKU CH-31E4-QM52R

IEC magnetic contactor rated 9 A inductive and 22 A resistive with a 415/480 V AC coil, three poles and one normally-open auxiliary contact for 3 hp motor control

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC contactor rated 9 A inductive load for reliable motor control
  • 415/480 V AC coil voltage suits standard industrial supplies
  • Three-pole non-reversing design simplifies starter wiring
  • 1 NO auxiliary contact provides ready status feedback
  • DIN rail or panel mounting fits common enclosure layouts

IEC Magnetic Contactor 9 A 480 V AC

The Eaton XTCE009B10C is a non-reversing IEC magnetic contactor rated for 9 A inductive and 22 A resistive loads at 480 V AC. It provides three-pole switching for motor control and power distribution circuits in industrial panels.

Capacity and headroom for three-phase motors

The contactor handles up to 3 hp at 240 V AC three-phase and carries 9 A inductive or 22 A resistive current at 480 V AC. The 415/480 V AC coil voltage suits standard industrial control voltages, while the 1NO auxiliary contact adds a single status or interlock signal.

Screw-terminal DIN-rail mount for panel builders

Screw terminals accept ring or fork lugs for secure wiring, and the frame size B body mounts on DIN rail or directly on a panel. The transparent housing allows visual inspection of contacts, and the compact 2 in by 3 in footprint fits tight enclosure layouts.

Highlights

  • IEC contactor rated 9 A inductive load for reliable motor control
  • 415/480 V AC coil voltage suits standard industrial supplies
  • Three-pole non-reversing design simplifies starter wiring
  • 1 NO auxiliary contact provides ready status feedback
  • DIN rail or panel mounting fits common enclosure layouts

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Will this 9 A contactor work with my existing 240 V AC 3 hp motor starter circuit?

Yes — it is rated for 3 hp at 240 V AC three-phase and carries 9 A inductive load, so it matches that motor starter.

How do I confirm the coil is energised correctly after wiring it to a 415/480 V AC supply?

Measure the coil terminals — you should read 415/480 V AC when the control circuit is live, and the main power contacts will close.

Does the box include DIN-rail clips and screw terminals, or must I buy them separately?

The contactor has integrated screw terminals and mounts on DIN rail or panel; no extra clips or terminals are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.