We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact grey contactor with screw terminals and DIN rail clips

Eaton

Eaton XTCE007B01A IEC Magnetic Contactor 1NC 120V AC 3P Non-Reversing

SKU CH-PV3D-91W3R

Three-pole IEC magnetic contactor rated 7 A inductive and 22 A resistive with a 110/120 V AC coil and one normally-closed auxiliary contact

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC-rated magnetic contactor for reliable motor switching
  • 120 V AC coil voltage suits standard control circuits
  • Three-pole design handles three-phase loads up to 7 A inductive
  • Single normally-closed auxiliary contact simplifies safety circuits
  • DIN-rail and panel mounting options fit diverse enclosures

IEC Magnetic Contactor for Motor Control

This Eaton XTCE007B01A contactor switches three-phase inductive loads up to 7 A and resistive loads up to 22 A. It operates on a 110/120V AC coil and provides a 2 hp rating at 240V AC three-phase. The unit suits industrial automation panels that require non-reversing motor starting.

DIN Rail Mount with Screw Terminals

The contactor fits standard DIN rail or panel mounting and uses screw terminals for secure wiring. Auxiliary contacts are supplied in a 1NC configuration for control-circuit feedback. The open frame carries no NEMA enclosure rating, so the installer must provide a suitable cabinet or guard.

Verify Coil Voltage and Load Type

Confirm that the control circuit supplies 110/120V AC before ordering. Ensure the motor load does not exceed the 7 A inductive or 22 A resistive ratings. This device is not for reversing applications or for loads that require a different pole count or auxiliary contact arrangement.

Highlights

  • IEC-rated magnetic contactor for reliable motor switching
  • 120 V AC coil voltage suits standard control circuits
  • Three-pole design handles three-phase loads up to 7 A inductive
  • Single normally-closed auxiliary contact simplifies safety circuits
  • DIN-rail and panel mounting options fit diverse enclosures

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How can I confirm the contactor is operating correctly after wiring it to a 120 V AC coil?

Apply 110/120 V AC to the coil and listen for the distinct mechanical click; then measure continuity across the three main poles — they should show a closed circuit — and verify the single NC auxiliary contact opens when the coil is energised.

What components are included with the contactor and what must I source separately?

The unit ships as the contactor body only with screw terminals; you will need to supply DIN rail or panel mounting hardware, power and control wiring, and any overload relay or enclosure required by your installation.

Which coil voltage version should I select for a 120 V AC control circuit?

Choose the 110/120 V AC coil version listed — it is the only coil rating offered for this frame size and matches standard North American control voltages.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.