Eaton
Eaton Safety Switch 240VAC 3PST 60A DG322URB
Non-fusible safety switch rated 60 A at 240 V AC with 3PST contacts in a NEMA 3R galvanised-steel enclosure
- MaterialHAWA
- Three-pole switching handles 60 A at 240 V AC
- 15 hp motor rating supports heavy-duty three-phase loads
- NEMA 3R galvanised-steel enclosure resists outdoor weather
- IP 14 rating protects against solid objects and splashing water
- UL 98 listed to NEMA KS-1 safety standard
Eaton Safety Switch 240VAC 3PST 60A
This Eaton safety switch is a non-fusible, general-duty disconnect rated for 60 amps at 240 volts AC three-phase. It carries a 15 horsepower rating at 240 volts AC and is housed in a galvanised steel NEMA 3R enclosure with an IP14 rating. The unit measures 14.2 inches high, 8.7 inches wide and 7.4 inches deep and provides four wires across three poles in a 3PST contact form. It meets NEMA KS-1 standards and is UL listed to UL98.
Suitable applications and limits
The switch suits industrial or commercial installations that require a visible-break disconnect for three-phase motor loads up to 15 hp in outdoor or damp locations. It is not intended for applications needing fused over-current protection within the same enclosure, nor for systems operating above 240 volts AC or requiring a higher ampacity than 60 amps. Buyers needing a fusible disconnect or a NEMA 4X rating should look at other product lines.
Deciding specification
The single figure that determines fit is the 60-amp, 240-volt AC three-phase rating combined with the NEMA 3R enclosure; if the circuit exceeds 60 amps or requires a different voltage, phase count or environmental rating, this switch will not meet the installation requirements.
Highlights
- Three-pole switching handles 60 A at 240 V AC
- 15 hp motor rating supports heavy-duty three-phase loads
- NEMA 3R galvanised-steel enclosure resists outdoor weather
- IP 14 rating protects against solid objects and splashing water
- UL 98 listed to NEMA KS-1 safety standard
Specifications
| Material | HAWA |
|---|---|
| Brand | Eaton |
Questions about this item
Should I pick the 60 A version or a different amperage for my 240 V three-phase circuit?
Choose the 60 A rating when your load requires up to 60 amps at 240 V AC three-phase; the switch is built for that exact current and voltage.
What does the 15 hp @ 240 V AC rating tell me about motor-starting capability?
It means the switch can safely disconnect a three-phase motor load of up to 15 horsepower at 240 V AC without welding contacts.
How does the NEMA 3R enclosure and UL 98 listing affect outdoor installation?
The NEMA 3R metallic enclosure resists rain and sleet, while the UL 98 listing confirms the switch meets safety standards for service-entrance use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
