We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular rocker switch with three quarter-inch quick-connect tabs and a momentary on-off-on action

Eaton

Eaton NGR10051BN00N SPDT momentary rocker switch electrical box

SKU CH-P6KX-VXW4B

SPDT momentary rocker switch rated 10A at 250V AC and 15A at 125V AC with .250 in quick-connect tabs

  • TypeEnclosures
  • SPDT momentary action gives three distinct switching states
  • 10 A at 250 V AC and 15 A at 125 V AC ratings handle common mains loads
  • 15 A at 28 V DC rating supports low-voltage DC circuits
  • 250 in quick-connect tabs enable fast, solderless wiring
  • CSA and UL approvable markings confirm compliance with recognised safety standards

Eaton SPDT Momentary Rocker Switch

This Eaton rocker switch provides SPDT momentary on/off/on control for electrical circuits. It is suited for panel-mounted applications where a non-illuminated, quick-connect actuator is required. The switch carries CSA and UL approvable ratings for both AC and DC loads. Installers needing a compact three-position momentary switch will find this model appropriate.

Installation and Common Issues

The switch mounts through a rectangular hole measuring 0.867 in by 1.734 in and uses 0.250 in quick-connect tabs for wiring. Ensure the panel cut-out matches these dimensions exactly to avoid loose fit or mounting stress. Crimp quality on the tabs is critical; poor crimps cause intermittent contact or overheating under load. Verify the momentary action returns cleanly to centre after each press before finalising the installation.

Pre-Order Compatibility Checks

Confirm your circuit voltage does not exceed 250 V AC or 28 V DC and that current draw stays within 10 A at 250 V AC, 15 A at 125 V AC, or 15 A at 28 V DC. The SPDT three-terminal layout must match your wiring schematic; this switch is not suitable for applications requiring maintained positions or different contact forms. Check that the non-illuminated actuator meets your visibility requirements.

Highlights

  • SPDT momentary action gives three distinct switching states
  • 10 A at 250 V AC and 15 A at 125 V AC ratings handle common mains loads
  • 15 A at 28 V DC rating supports low-voltage DC circuits
  • 250 in quick-connect tabs enable fast, solderless wiring
  • CSA and UL approvable markings confirm compliance with recognised safety standards

Specifications

BrandEATON
TypeEnclosures

Questions about this item

How do I confirm the Eaton NGR10051BN00N switch is wired correctly after installation?

Verify momentary on/off/momentary on action at the rocker, then measure continuity across the three 0.250 in quick-connect tabs in each position; the SPDT circuit should switch cleanly between the two momentary states and return to centre off when released.

What comes with the Eaton NGR10051BN00N rocker switch and what must I supply?

The package contains the non-illuminated SPDT switch body rated 10A at 250V AC, 15A at 125V AC and 15A at 28V DC; you must provide 0.250 in female quick-connect terminals, mounting hardware for the 0.867 in by 1.734 in cut-out and wiring rated for the load.

Which version of the Eaton NGR10051BN00N should I choose for a 12 V DC automotive circuit?

Select this model — its DC contact rating of 15A at 28V DC covers 12 V systems, and the momentary on/off/momentary on function with SPDT contacts suits typical accessory or winch controls.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.