Eaton
Eaton M22-C1-M13H Control Station 22 mm Red 40 mm Mushroom Head
A 22 mm red mushroom-head emergency-stop push button in a yellow plastic enclosure rated IP66 and NEMA 1, 13, 2, 3, 4, 4X with a 10 A contact at 600 V AC
- Engine BrandEATON
- Engine Size22 mm
- Emergency-stop mushroom head for immediate machine shutdown
- 22 mm mounting fits standard industrial panels
- IP66 enclosure resists dust and water jets
- 10 A AC / 5 A DC contacts handle heavy control circuits
- Yellow plastic housing with CCC, CE, CSA, GoST-R, Lloyd's Register approvals
Control Station for Emergency Stop
The Eaton M22-C1-M13H is a 22 mm control station built for emergency stop applications. It features a single 40 mm red mushroom head operator with maintained action. The enclosure is yellow plastic rated to NEMA 1, 2, 3, 4, 4X and 13 with an IP66 rating. Standards met include CCC, CE, CSA, GoST-R and Lloyd's Register.
Maintained Action and Contact Durability
The operator stays in the activated position until manually reset, providing a clear visual indication of the stop state. A single normally open contact rated A600 handles 10A at 600V AC and 5A at 24V DC. The metal head construction withstands repeated industrial use while the plastic enclosure resists corrosion and impact in harsh environments.
NEMA and IP Rating Constraints
The NEMA 4X and IP66 ratings confirm protection against hose-directed water and corrosion, but do not guarantee submersion resistance. Contact ratings are defined by the A600 designation for AC and the stated DC value; loads beyond 600V AC or 24V DC fall outside the certified limits. The station carries no pilot lights and supports only one operator.
Highlights
- Emergency-stop mushroom head for immediate machine shutdown
- 22 mm mounting fits standard industrial panels
- IP66 enclosure resists dust and water jets
- 10 A AC / 5 A DC contacts handle heavy control circuits
- Yellow plastic housing with CCC, CE, CSA, GoST-R, Lloyd's Register approvals
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 22 mm |
Questions about this item
Does the red 40 mm mushroom head generate noticeable heat when the 10 A contact runs all day?
The maintained pushbutton is a passive operator; it carries 10 A at 600 V AC without active components, so it produces no measurable heat during continuous use.
What wiring or mounting hardware must I already have to install this 22 mm control station?
You need a 22 mm panel cut-out, conductors rated for 10 A at 600 V AC or 5 A at 24 V DC, and standard crimp or screw terminals — no special tools or proprietary connectors are required.
Will the IP66 plastic enclosure and metal head survive beside older NEMA 1 equipment in a damp panel?
Yes, the station meets NEMA 1, 2, 3, 4, 4X and 13 plus IP66, so it withstands the same wet and dusty conditions that legacy NEMA 1 gear is rated for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
