We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel 45-degree hydraulic elbow with zinc finish, 1.97 in long

Eaton

Eaton FF2068T1212S vacuum accessory 45° elbow 1 3/16-12 ORS to 1 1/16-12 ORB 5000 PSI

SKU CH-NYK4-DJX26 MPN FF2068T1212S

Connects 1 3/16-12 ORS to 1 1/16-12 ORB with a 45° elbow rated to 5000 PSI

  • TypePart
  • 45° elbow routes hydraulic lines in tight spaces
  • Male ORS 1 3/16-12 to Male ORB 1 1/16-12 connects differing thread standards
  • 5000 PSI max working pressure handles demanding hydraulic systems
  • 97 in overall length keeps assemblies compact
  • Trivalent chromium zinc finish meets RoHS and JIC/SAE standards

Hydraulic adapter for high-pressure systems

This Eaton FF2068T1212S vacuum accessory is a 45-degree elbow adapter that connects a male ORS fitting sized 1 3/16-12 to a male ORB fitting sized 1 1/16-12. It is built for hydraulic hose assemblies requiring a 5000 PSI maximum working pressure. The steel body uses a RoHS-compliant trivalent chromium zinc finish and meets SAE/JIC standards for ORS, ORB, and 37 flange connections.

Replaces mismatched ORS and ORB thread connections

Use this adapter when joining components with dissimilar SAE thread standards in a hydraulic circuit. The 45-degree angle helps route hoses around obstacles without sharp bends that restrict flow. The jump is worth it when a straight union cannot satisfy the spatial constraints of the installation.

Steel construction sustains 5000 PSI under

The trivalent chromium zinc coating resists corrosion during prolonged exposure to hydraulic fluids and environmental moisture. Rated for a maximum working pressure of 5000 PSI, the fitting maintains seal integrity through pressure cycles and vibration. Its 1.97-inch length keeps the assembly compact while the steel body withstands sustained mechanical stress without deformation.

Highlights

  • 45° elbow routes hydraulic lines in tight spaces
  • Male ORS 1 3/16-12 to Male ORB 1 1/16-12 connects differing thread standards
  • 5000 PSI max working pressure handles demanding hydraulic systems
  • 97 in overall length keeps assemblies compact
  • Trivalent chromium zinc finish meets RoHS and JIC/SAE standards

Specifications

BrandEaton
ModelFF2068T1212S
TypePart

Questions about this item

What thread sizes does the 45° elbow connect?

The elbow joins a 1 3/16-12 ORS male thread to a 1 1/16-12 ORB male thread.

How is the adapter installed and what step is often missed?

Thread the ORS end onto the hose fitting and the ORB end into the port; the step often missed is torquing both connections to the SAE/JIC specification for a 5000 PSI seal.

When should the fitting be replaced?

Replace the steel fitting if the trivalent chromium zinc finish shows corrosion, threads are damaged, or after any impact that could compromise the 5000 PSI rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.