We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eaton remote keypad cable, 1.5 ft, plug-in connectors, 0.55 in high, 0.47 in wide

Eaton

Eaton DXG-CBL-3M0 Remote Keypad Cable 1.5 ft

SKU CH-SRST-SD4NM

A 1.5 ft remote keypad cable connects DG1 drives with plug-in mounting

  • TypeMotors
  • Connects remote keypad to DG1 drives
  • 5 ft cable length for flexible placement
  • Plug-in mounting enables quick installation
  • 55 in height fits tight spaces
  • 47 in width suits compact panels

Remote Keypad Cable for DG1 Drives

This Eaton cable connects a remote keypad to DG1 drives. It measures 1.5 ft in length and uses a plug-in mounting method. The accessory is intended for technicians installing or servicing compatible drive systems.

Plug-in mounting and 1.5 ft reach

The plug-in design allows direct connection without additional tools or terminal blocks. At 1.5 ft, the cable provides a fixed separation between the keypad and the drive unit. These characteristics determine the physical layout options for the control station.

Verify DG1 compatibility and clearance

Confirm that the target drive is a DG1 model before ordering. Ensure the installation area can accommodate the cable depth of 118.0 in and the connector profile of 0.55 in height by 0.47 in width. The cable is restricted from sale in certain states.

Highlights

  • Connects remote keypad to DG1 drives
  • 5 ft cable length for flexible placement
  • Plug-in mounting enables quick installation
  • 55 in height fits tight spaces
  • 47 in width suits compact panels

Specifications

BrandEATON
TypeMotors

Questions about this item

Will the plug-in connectors on this remote keypad cable need periodic replacement?

The cable uses a plug-in mounting type with no moving contacts, so the connectors themselves do not wear out; only physical damage to the cable jacket would require replacement.

What is the first limit reached when the cable runs continuously with a DG1 drive?

The 1.5 ft length fixes the maximum distance between the drive and the remote keypad; voltage drop or signal degradation over longer runs is not a factor at this short length.

Does the cable generate any heat or add to power draw when the drive operates all day?

The cable is a passive 0.5 m copper link carrying only low-voltage keypad signals, so it produces no measurable heat and adds no perceptible load to the drive’s power consumption.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.