Eaton
Eaton DS7-342SX016N0-N Soft Start Controller 480V 15.2A
Soft start controller for 480 V three-phase motors up to 10 hp with 15.2 A output and 110-230 V AC control voltage
- Smooth motor starts at 480V AC with 15.2 A output current
- Handles 10 hp three-phase loads at 480V AC for heavy-duty applications
- Flexible control voltage range from 110 to 230V AC suits varied panels
- Supports 3 hp at 200V AC and 5 hp at 240V AC three-phase
- NEMA 1 enclosure protects internals in standard indoor environments
Eaton DS7-342SX016N0-N Soft Start Controller
This Eaton soft start controller manages motor acceleration for industrial equipment. It accepts 480V AC input and delivers up to 15.2 A output current at 480V AC. The unit suits three-phase systems rated at 10 hp at 480V AC. Control voltage ranges from 110 to 230V AC.
For three-phase motor control panels needing
Installers wiring 480V AC three-phase motors up to 10 hp will find the ratings match. The NEMA 1 enclosure fits indoor panel builds. Buyers needing higher horsepower, different input voltages, or outdoor-rated enclosures should look elsewhere.
480V AC input and 15.2 A output at 10 hp
The single specification that decides fit is the 480V AC input paired with 15.2 A output current for 10 hp three-phase loads. Verify your motor nameplate matches these voltage, current and horsepower values before purchase.
Highlights
- Smooth motor starts at 480V AC with 15.2 A output current
- Handles 10 hp three-phase loads at 480V AC for heavy-duty applications
- Flexible control voltage range from 110 to 230V AC suits varied panels
- Supports 3 hp at 200V AC and 5 hp at 240V AC three-phase
- NEMA 1 enclosure protects internals in standard indoor environments
Specifications
| Brand | EATON |
|---|
Questions about this item
What enclosure rating does the DS7-342SX016N0-N carry for panel mounting?
The controller is rated NEMA 1, so it must be installed inside a protected indoor enclosure.
Which control-voltage range must be supplied to the unit's control terminals?
Apply 110–230 V AC to the control input; the main power circuit remains 480 V AC three-phase.
Are there user-serviceable components inside that require periodic replacement?
No user-serviceable parts are specified; the solid-state design is intended to operate without internal maintenance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
