Eaton
Eaton DS7-342SX012N0-N soft start controller 12 A 240/480 V AC
Soft-starts three-phase motors up to 7.5 hp at 480 V AC with 11 A output and 120–230 V AC control
- Soft starts motors to reduce mechanical stress with 11 A output current
- Handles 240/480 V AC input for flexible three-phase installations
- Delivers up to 7 1/2 hp at 480 V AC for demanding loads
- Operates on 120-230 V AC control voltage for easy integration
- NEMA 1 enclosure suits indoor mounting in clean environments
Eaton DS7-342SX012N0-N 12 A Soft Start Controller
The Eaton DS7-342SX012N0-N is a soft start controller rated at 12 A for 240/480 V AC supplies. It limits inrush current on three-phase motors up to 7.5 hp at 480 V AC. Control voltage accepts 120-230 V AC and the enclosure meets NEMA 1 rating.
Suits 11 A motor loads up to 7.5 hp
Installers controlling three-phase motors at 200 V AC, 240 V AC or 480 V AC within the 11 A output rating will find this unit suitable. Applications requiring higher current, different control voltages or outdoor-rated enclosures should consider other options.
11 A output current at 480 V AC
The decisive specification is the 11 A output current at 480 V AC, which defines the maximum motor load the controller can handle. Verify the motor full-load current against this figure before purchase.
Highlights
- Soft starts motors to reduce mechanical stress with 11 A output current
- Handles 240/480 V AC input for flexible three-phase installations
- Delivers up to 7 1/2 hp at 480 V AC for demanding loads
- Operates on 120-230 V AC control voltage for easy integration
- NEMA 1 enclosure suits indoor mounting in clean environments
Specifications
| Brand | EATON |
|---|
Questions about this item
What three-phase motor voltage and horsepower ratings does the DS7-342SX012N0-N support?
It is rated for 3 hp at 200 V AC, 3 hp at 240 V AC and 7 1/2 hp at 480 V AC, all three-phase.
Will the controller operate with a 120 V AC control circuit?
Yes, the control voltage range is 120-230 V AC, so a 120 V AC supply is within specification.
How can I confirm the unit is delivering the expected output current after installation?
Measure the motor current under load; the controller is rated for 11 A output at 480 V AC.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
