Eaton
Eaton C22-DRLH-G-K10-24 Illuminated Push Button 22 mm 1NO Green 24V AC/DC
22 mm illuminated push button with green LED, 1NO contact, IP67 and IP69K rated for 24 V AC/DC supply
- Engine BrandEATON
- Engine Size22 mm
- Maintained operation converts easily in the field
- 22 mm cutout fits standard panel openings
- Green LED illumination runs on 24 V AC/DC
- IP67 and IP69K ratings seal against dust and water jets
- Silver contacts rated 1.5 A at 230 V AC and 3 A at 24 V DC
Illuminated Push Button 22 mm
This Eaton illuminated push button fits a 22 mm panel cut-out and provides a green LED indicator powered from 24 V AC/DC. It is intended for control panels that need a maintained-action operator with a single normally open contact. The plastic head and silver-coated bezel suit industrial environments.
Contact rating and environmental sealing
The silver contact handles 1.5 A at 230 V AC and 3 A at 24 V DC under AC-15 and DC-13 duty. NEMA ratings 1, 12, 13, 3 and 4X plus IP 67 and 69K protect against dust, water jets and high-pressure wash-down. The maintained mechanism can be field-converted if momentary action is required.
24 V AC/DC LED lamp voltage
The built-in full-voltage LED module operates directly from 24 V AC or DC supplies without external resistors. Buyers whose control circuits run at other voltages cannot use this operator without a separate transformer or power supply.
Highlights
- Maintained operation converts easily in the field
- 22 mm cutout fits standard panel openings
- Green LED illumination runs on 24 V AC/DC
- IP67 and IP69K ratings seal against dust and water jets
- Silver contacts rated 1.5 A at 230 V AC and 3 A at 24 V DC
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 22 mm |
Questions about this item
Will the 22 mm illuminated push button fit the same panel cut-out as my existing 22 mm operators?
Yes, the 22 mm mounting diameter matches the standard cut-out used by most legacy 22 mm push buttons and selector switches, so it installs without enlarging the hole.
How can I verify the green LED is operating correctly once the button is wired to 24V AC/DC?
Apply 24V AC or DC to the lamp module; the full‑voltage LED should illuminate steadily in green, confirming the lamp circuit is functional.
Does the package include the silver‑coated plastic bezel and the 1NO contact block, or must I order them separately?
The bezel and the 1NO contact block are built into the operator, so the complete assembly arrives ready to mount with no extra parts required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
