We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight steel hydraulic hose fitting with barbed and NPT ends

Eaton

Eaton Aeroquip FJ9068-0808S Straight Hydraulic Hose Fitting 1/2 in

SKU CH-66KV-26W30

Straight steel hydraulic hose fitting with 1/2 in NPT male thread and 1/2 in barb for 300 psi systems

  • Straight shape simplifies routing in tight hydraulic circuits
  • 300 psi rating handles standard medium-pressure applications
  • Male NPT and barb ends connect hose to pipe without adapters
  • Steel construction resists wear in demanding environments
  • Compatible with multiple Aeroquip hose series for flexible system design

Straight Hydraulic Hose Fitting

This Eaton Aeroquip FJ9068-0808S is a straight hydraulic hose fitting designed for 1/2 inch hose inner diameter. It connects hose series such as 2556, 2565, 2575, FC332, FC647, and H201 to a 1/2 inch NPT male port. The barbed end secures the hose while the NPT thread mates with the port.

Compatibility Check Before Ordering

Verify that your hose matches dash size -8 and has a 1/2 inch inner diameter. Confirm the hose series is one of the listed compatible types: 2556, 2565, 2575, FC332, FC647, or H201. Ensure the mating port accepts a 1/2 inch NPT male thread and that the 300 psi pressure rating meets your system requirements.

Sustained Pressure Performance

The steel construction using 12L14 and 12L15 grades provides durability under continuous 300 psi operating pressure. The barbed hose connection and NPT thread seal maintain integrity during prolonged hydraulic cycles. This fitting is built for steady-state fluid transfer rather than brief pressure spikes.

Highlights

  • Straight shape simplifies routing in tight hydraulic circuits
  • 300 psi rating handles standard medium-pressure applications
  • Male NPT and barb ends connect hose to pipe without adapters
  • Steel construction resists wear in demanding environments
  • Compatible with multiple Aeroquip hose series for flexible system design

Specifications

BrandEATON AEROQUIP

Questions about this item

What comes in the box and what else do I need to buy?

The box contains one straight steel hose fitting with a 1/2 in barb and 1/2 in NPT thread. You must supply compatible hose from series 2556, 2565, 2575, FC332, FC647 or H201 and any required clamps or sealant.

Which hose series should I select for this fitting?

Choose hose with dash size -8 and 1/2 in inner diameter from series 2556, 2565, 2575, FC332, FC647 or H201 to match the barb and 300 psi rating.

What does the 300 psi rating mean when the fitting is installed?

It indicates the maximum working pressure the steel-to-steel joint can handle when assembled correctly on approved hose with proper NPT sealing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.