We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver carbon steel 90-degree elbow adapter with 13/16-16 ORS male and 1/2-14 NPTF male threads

Eaton

Eaton Aeroquip FF2032T1008S 90° Elbow Adapter 13/16-16 ORS Male to 1/2-14 NPTF Male

SKU CH-FABJ-GD04E

90-degree elbow adapter connects 13/16-16 ORS male to 1/2-14 NPTF male threads with carbon steel construction rated for 6,000 psi

  • 90° elbow simplifies routing in tight hydraulic systems
  • 6,000 psi rating handles demanding high-pressure applications
  • Carbon steel construction resists wear in harsh environments
  • ORS male to NPTF male connects different thread standards
  • 31 in overall length fits compact installations

Eaton Aeroquip 90° ORS-NPTF Adapter

This carbon-steel elbow joins a 13/16-16 ORS male port to a 1/2-14 NPTF male thread in hydraulic systems. The 90-degree bend routes hose around tight clearances without extra fittings. It suits mobile equipment, industrial power units and agricultural machinery that use O-ring face seal and tapered pipe connections. The 1.31 in overall length keeps the assembly compact.

Sustained pressure performance

Rated for 6,000 psi continuous service, the fitting maintains seal integrity under steady pump output and pressure spikes. The included O-ring provides a reliable face seal on the ORS end while the NPTF threads deliver a dry-seal pipe joint. Carbon steel construction (12L14/12L15) resists deformation during repeated pressure cycles. The rigid, non-crimpable design eliminates a potential leak path at a crimp collar.

Thermal and installation notes

Carbon steel transmits fluid temperature directly; expect the fitting to reach system oil temperature in normal operation. No moving parts or seals beyond the single O-ring mean no noise generation. The 37-degree SAE/JIC flare geometry on the ORS seat ensures consistent make-up torque without galling. Installation requires standard wrenches on the hex flats; no special tools or crimping equipment are needed.

Highlights

  • 90° elbow simplifies routing in tight hydraulic systems
  • 6,000 psi rating handles demanding high-pressure applications
  • Carbon steel construction resists wear in harsh environments
  • ORS male to NPTF male connects different thread standards
  • 31 in overall length fits compact installations

Specifications

BrandEATON AEROQUIP

Questions about this item

Will the carbon-steel body of the FF2032T1008S adapter handle continuous 6,000 psi hydraulic pressure without overheating?

The fitting is rated for 6,000 psi working pressure and is made from carbon steel grades 12L14 and 12L15, so it handles sustained hydraulic loads without generating heat.

Which hydraulic hose and thread sealant do I need to connect the 13/16-16 ORS male and 1/2-14 NPTF male ends?

Use a 5/8 in hose with an ORS female swivel on one side and a 1/2 in NPTF female port on the other; the ORS end includes an O-ring, while the NPTF end requires thread sealant.

Can I thread this 90-degree elbow onto a legacy SAE/JIC 37-degree flare port without an adapter?

No — the ORS male end seals with an O-ring face and the NPTF male end uses tapered pipe threads; neither matches the 37-degree flare sealing surface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.