Eaton
Eaton Aeroquip 2250-6-6S hydraulic adapter 90° elbow 3/8-18 ORB-JIC
90-degree elbow adapter joins 3/8-18 ORB and JIC male threads for hydraulic hose connections
- 90° elbow simplifies routing in tight spaces
- 4,000 psi rating handles high-pressure hydraulic systems
- Carbon steel construction resists wear and corrosion
- ORB to JIC threads connect different fitting standards
- 7 in overall length fits compact installations
90° ORB-to-JIC hydraulic elbow
The Eaton Aeroquip 2250-6-6S is a carbon-steel 90-degree elbow that joins a 3/8-18 male ORB port to a 3/8-18 male JIC port. It suits technicians assembling or repairing high-pressure hydraulic circuits on mobile or industrial machinery. The fitting is rated to 4 000 psi and measures 2.7 in overall length. No O-ring is included and the part is not crimpable.
SAE J514 pressure envelope
The adapter conforms to SAE J514 dimensions and a 4 000 psi working pressure, so it must not be used in systems that exceed that limit or that require a different thread standard. Its 12L14/12L15 carbon-steel construction resists vibration but is not stainless, so corrosion protection depends on the fluid and environment. The swivel nut eases alignment during installation but does not increase the pressure rating. Verify that both mating ports match the 3/8-18 thread form before assembly.
3/8-18 ORB male to 3/8-18 JIC male
The defining specification is the dual 3/8-18 thread: one end ORB, the other JIC, both male. If your circuit calls for a female port, a different thread pitch, or a straight rather than 90-degree geometry, this elbow will not fit. Buyers who need a female swivel, a larger bore, or a stainless body must select a different part number.
Highlights
- 90° elbow simplifies routing in tight spaces
- 4,000 psi rating handles high-pressure hydraulic systems
- Carbon steel construction resists wear and corrosion
- ORB to JIC threads connect different fitting standards
- 7 in overall length fits compact installations
Specifications
| Brand | EATON AEROQUIP |
|---|
Questions about this item
Should I pick the 3/8-18 ORB-JIC 90° elbow or a different size for my 3/8 in hydraulic lines?
Choose this adapter when both ports are 3/8 in and you need a 90-degree turn between an ORB male and a JIC male connection.
What does the 4,000 psi rating mean once the fitting is installed?
It is the maximum working pressure the carbon-steel body and seal can handle in normal hydraulic service.
How does the SAE J514 standard cap the JIC 3/8-18 thread in practice?
SAE J514 governs the 3/8-18 JIC flare dimensions and assembly torque so the joint seals reliably at the rated pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
