Eaton
Eaton Aeroquip 2250-12-12S 90° Elbow Hydraulic Adapter
A 90-degree elbow hydraulic adapter connecting 3/4 inch ORB male to 3/4 inch JIC male threads, rated to 3,000 psi with carbon steel construction
- 90° elbow routes hydraulic lines in tight spaces
- Male NPT to male JIC connects ORB and JIC ports
- 3000 psi rating handles high-pressure systems
- Carbon steel 12L14/12L15 construction resists wear
- SAE J514 compliant for hydraulic reliability
Hydraulic Elbow Adapter 90°
This Eaton Aeroquip 2250-12-12S adapter connects a 3/4 in -14 ORB male port to a 3/4 in JIC male swivel in a 90 degree elbow configuration. It suits hydraulic circuits that need a compact directional change without adding extra fittings. The carbon steel construction meets SAE J514 requirements for general hydraulic service. The swivel end simplifies alignment during installation.
Rated Pressure and Flow Capacity
The fitting handles a working pressure of 3000 psi in compatible hydraulic hose assemblies. Its 3/4 inch bore provides sufficient flow area for medium-duty mobile and industrial circuits. The elbow geometry introduces a modest pressure drop compared with straight adapters, so very high-flow systems may need larger diameters. The 3 inch overall length keeps the assembly short where space is limited.
Replaces Separate Elbow And Straight Fittings
Using this single 90 degree swivel elbow removes the need for a separate straight adapter plus a fixed elbow, reducing potential leak paths and assembly time. The jump is worthwhile when routing hoses around tight frames or when the ORB port orientation forces a sharp turn. Builders who need a straight-through ORB-to-JIC connection or a different thread size should select an alternative fitting.
Highlights
- 90° elbow routes hydraulic lines in tight spaces
- Male NPT to male JIC connects ORB and JIC ports
- 3000 psi rating handles high-pressure systems
- Carbon steel 12L14/12L15 construction resists wear
- SAE J514 compliant for hydraulic reliability
Specifications
| Brand | EATON AEROQUIP |
|---|
Questions about this item
Will the 90° elbow thread into a 3/4-14 NPT port on my older pump without leaking?
The A end is a male NPT thread sized 3/4-14 so it screws directly into a matching female NPT port on legacy equipment.
How can I confirm the 3/4 JIC swivel on the B end is sealing correctly after installation?
Pressurise the circuit to the rated 3 000 psi and watch the swivel nut for any weep; the metal-to-metal flare seal should hold with no drips.
Does the box contain the O-ring for the ORB side or must I source it separately?
The specifications state Includes O-Ring No, so you will need to supply the correct ORB O-ring yourself.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
