We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel 90 degree elbow adapter with male ORB and male JIC threads

Eaton

Eaton Aeroquip 2244-12-12S 90° Elbow Adapter 3/4-14 ORB-JIC

SKU CH-FF55-Z3EZ3

A 90-degree elbow adapter joins a 3/4-14 ORB port to a 1-1/16-12 JIC port with carbon steel construction rated to 3,000 psi

  • 90° elbow routes hose in tight spaces
  • 3/4-14 ORB to 1-1/16-12 JIC connects two standards
  • 3,000 psi rating handles high-pressure systems
  • Carbon steel construction resists wear and corrosion
  • Swivel design simplifies installation and alignment

90° Elbow Adapter 3/4-14 ORB-JIC

This Eaton Aeroquip 2244-12-12S adapter connects a 3/4-14 ORB port to a 3/4-14 JIC fitting in a 90-degree elbow configuration. It suits hydraulic system builders who need to change flow direction between these two thread standards. The carbon steel construction handles 3,000 psi working pressure in industrial and mobile equipment.

Thermals Noise Power Draw

As a passive hydraulic fitting this component generates no heat, produces no noise and draws no power during operation. The 3-inch overall length fits within standard routing envelopes without adding thermal load to the circuit. Carbon steel material maintains structural integrity across the rated pressure range.

Upgrade Path

This adapter replaces makeshift assemblies that combine separate elbows and straight fittings to bridge ORB and JIC threads. The single-piece design reduces potential leak points compared to multi-component solutions. The jump is worth it when simplifying hose routing on 3/4-inch hydraulic lines rated to 3,000 psi.

Highlights

  • 90° elbow routes hose in tight spaces
  • 3/4-14 ORB to 1-1/16-12 JIC connects two standards
  • 3,000 psi rating handles high-pressure systems
  • Carbon steel construction resists wear and corrosion
  • Swivel design simplifies installation and alignment

Specifications

BrandEATON AEROQUIP

Questions about this item

How do I install the 90-degree elbow adapter with 3/4-14 ORB and 1-1/16-12 JIC threads, and what step is often missed?

Thread the ORB end into the port until the O-ring seats, then tighten the JIC swivel nut to the recommended torque; the step often missed is lubricating the O-ring before assembly to prevent damage.

What maintenance or replacement will this carbon-steel 2244-12-12S adapter need over time?

Inspect the O-ring on the ORB side and the flare seat on the JIC side at each service interval; replace the adapter if the carbon-steel body shows corrosion, cracks, or thread damage.

What is the first limit that appears under sustained use at the 3,000 psi rating?

The 3,000 psi working pressure is the primary limit; sustained operation at or near this pressure can accelerate seal wear and fatigue in the carbon-steel material.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.