Eaton
Eaton Aeroquip 2062-12-8S hydraulic adapter 90° elbow 3/4-16 ORB to 1/2 JIC
Connects 3/4 in ORB to 1/2 in JIC with a 90° carbon-steel elbow rated 4000 psi
- 90° elbow routes hose in tight spaces
- 3/4-16 ORB to 1/2 JIC connects two common thread standards
- 4,000 psi rating handles high-pressure hydraulic systems
- Carbon steel 12L14/12L15 construction resists wear and corrosion
- 1 in overall length fits compact installations
Hydraulic adapter 90° elbow
This Eaton Aeroquip 2062-12-8S connects a 3/4-16 ORB male port to a 1/2 JIC male port in a rigid 90 degree elbow. It suits hydraulic systems that require a directional change between these two thread standards. The carbon steel construction meets SAE J514 requirements.
Sustained pressure performance
Rated for 4,000 psi continuous working pressure, the fitting maintains seal integrity under steady load without the pressure drop seen in lower-rated elbows. The included O-ring on the ORB side provides reliable sealing through temperature cycles and vibration. No crimping is needed for installation.
Replaces mismatched thread fittings
Upgrade from improvised adapter stacks that join ORB and JIC threads with extra couplings. The single-piece elbow removes potential leak paths and reduces overall length to 2.1 inches. Not suited for systems needing a straight connector or a different thread combination.
Highlights
- 90° elbow routes hose in tight spaces
- 3/4-16 ORB to 1/2 JIC connects two common thread standards
- 4,000 psi rating handles high-pressure hydraulic systems
- Carbon steel 12L14/12L15 construction resists wear and corrosion
- 1 in overall length fits compact installations
Specifications
| Brand | EATON AEROQUIP |
|---|
Questions about this item
How much heat does the carbon-steel body generate during continuous 4,000 psi hydraulic operation?
The carbon-steel construction transfers fluid temperature without adding measurable heat of its own.
Which mating ports and seal are required to install the 3/4-16 ORB and 1/2 JIC ends?
You need a 3/4-16 ORB female port, a 1/2 JIC female swivel and the included O-ring for the ORB side.
Will the 90-degree elbow clear adjacent fittings on a legacy SAE J514 manifold?
The 2.1 in overall length and 90° bend match SAE J514 envelope dimensions for direct retrofit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
