Eaton
Eaton Aeroquip 2021-32-32S Hydraulic Adapter 2-111/2 2-1/2-12 Strt
Straight hydraulic adapter joining two 2-inch NPT female ends, rated to 250 psi in carbon steel
- Straight rigid fitting simplifies inline hydraulic connections
- Carbon steel construction resists pressure up to 250 psi
- NPT threads on both ends match 2 inch pipe
- SAE 37 degree flare ensures leak-free sealing
- Female-to-female design joins two male hose ends
Hydraulic Hose Adapter
This hydraulic hose adapter connects two female NPT threads in a straight configuration. It suits hydraulic systems that require a direct link between 2-inch pipe threads. The carbon steel body handles working pressures up to 250 psi. No O-ring is included with the fitting.
Replaces Threaded Couplings
Use this adapter when a rigid straight joint replaces a separate coupling and nipple assembly. The jump is worth it when a single-piece connection reduces leak paths and installation time. The SAE/JIC 37-degree specification ensures compatibility with matching flare fittings. It fits systems built around 12L14 or 12L15 carbon steel standards.
Fits 2-Inch NPT Ports
The adapter threads into 2-inch NPT female ports on both ends, requiring no crimping tools. Its straight shape keeps the flow path linear and frees up routing space compared with elbow fittings. Carbon steel construction resists deformation under rated pressure. Verify thread engagement depth matches the mating component specifications.
Highlights
- Straight rigid fitting simplifies inline hydraulic connections
- Carbon steel construction resists pressure up to 250 psi
- NPT threads on both ends match 2 inch pipe
- SAE 37 degree flare ensures leak-free sealing
- Female-to-female design joins two male hose ends
Specifications
| Brand | EATON AEROQUIP |
|---|
Questions about this item
What thread size and type does the 2021-32-32S adapter require for the NPT connection?
The adapter uses a 2-11-1/2 NPT thread on both ends, so the mating port must accept that exact thread pitch and diameter.
How is the carbon-steel 2021-32-32S adapter installed, and what step is often missed?
Thread each NPT end into its female port, then tighten to the specified torque; the step often missed is applying the correct sealant or tape to the tapered NPT threads before assembly.
What maintenance or replacement will the 2021-32-32S adapter need over time?
Inspect the 37-degree JIC sealing faces and carbon-steel threads for corrosion or deformation; replace the adapter if the sealing surfaces show pitting or the threads are damaged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
