Eaton
Eaton Aeroquip 1A8BF6 Hydraulic Crimp Fitting BSPP Straight G 1/2
Hydraulic crimp fitting with BSPP straight thread for 3/8 in hose dash size -6, compatible with multiple Eaton hose series
- Straight BSPP thread enables direct hydraulic connection
- Female swivel nut allows quick assembly on 1/2 in hose
- Compatible with multiple Eaton hose series including EC110 and FC619
- Crimp design provides permanent leak-free seal for 3/8 in ID hose
- New Eaton Aeroquip fitting meets OEM hydraulic system requirements
Straight BSPP Hydraulic Crimp Fitting
The Eaton Aeroquip 1A8BF6 is a straight female BSPP fitting designed for 3/8 inch inside-diameter hose with a dash-6 size. It threads at 1/2-14 BSPP and is built for crimp assembly on compatible Eaton hose series. This component suits maintenance technicians and hydraulic system assemblers who need a permanent, leak-free connection on medium-pressure lines. It is not for installers who require a reusable field-attachable fitting or a different thread standard such as NPT or JIC.
Crimp-only installation demands correct tooling
The fitting installs by crimping onto the hose using an Eaton-approved crimper and die set matched to the hose series and dash size. A common error is using an incorrect die or crimp diameter, which can cause the ferrule to crack or the hose to pull out under pressure. Another issue is failing to clean the hose cut end before insertion, leaving debris that compromises the seal. Always verify the crimp specification sheet for the exact hose series you are using before starting the job.
Confirm hose series and dash size compatibility
The 1A8BF6 is approved for a defined list of Eaton hose series including 2661, EC110, EC115, EC118, EC210, EC215, FC310, FC510, FC579, FC611, FC619, FC639, FC693, FC735, FC849, GH120, GH194, GH195, GH663, GH681, GH781 and GH793 in dash sizes 12 through 32 where applicable. It will not crimp correctly on hose series or dash sizes outside this list. Check your existing hose part number against the approved series and ensure the hose inside diameter is 3/8 inch before purchasing.
Highlights
- Straight BSPP thread enables direct hydraulic connection
- Female swivel nut allows quick assembly on 1/2 in hose
- Compatible with multiple Eaton hose series including EC110 and FC619
- Crimp design provides permanent leak-free seal for 3/8 in ID hose
- New Eaton Aeroquip fitting meets OEM hydraulic system requirements
Specifications
| Brand | EATON AEROQUIP |
|---|
Questions about this item
How can I verify the crimp is correct after installing the 1/2-14 BSPP female swivel on -6 hose?
Measure the crimp diameter against the Eaton specification for the hose series you used and confirm the swivel rotates freely without binding on the 1/2 inch BSPP thread.
What comes with the 1A8BF6 fitting and what must I source separately?
The box contains the straight BSPP female swivel fitting only; you must supply compatible -6 hose from the listed series and a crimp machine with the correct die set.
Which hose series from the compatibility list should I select for a 3/8 inch ID application?
Choose any series marked for -6 dash size such as EC115, FC310, GH195 or GH781; all support 3/8 inch ID and work with this 1/2-14 BSPP straight fitting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
