We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver toggle switch with threaded stem and screw terminals

Eaton

Eaton 7546K36 Toggle Switch SPST 10A 250V electrical box

SKU CH-D6ZM-NA7PN

Single-pole on/off toggle rated 10 A at 250 V with screw terminals and 0.50 in mounting hole

  • TypeIndustrial Electrical Controls & Automation
  • SPST on/off control with 10 A at 250 V AC rating
  • 20 A at 125 V AC rating for higher-current low-voltage circuits
  • 3/4 hp motor-load rating for small motor switching
  • 50 in mounting hole fits standard panel cut-outs
  • CSA, RoHS and UL listed for code-compliant installations

Eaton 7546K36 Toggle Switch SPST

The Eaton 7546K36 is a single-pole single-throw toggle switch rated for 10 A at 250 V AC and 20 A at 125 V AC. It provides a simple on/off control for industrial electrical circuits and automation panels. The switch includes a 3/4 hp rating for motor loads and carries CSA, RoHS and UL Listed approvals.

Verify panel cutout and wiring

Confirm that your panel has a 0.50 in diameter mounting hole to accept the 0.500 in stem diameter and thread size. The switch uses screw terminals for secure wire connections and requires a stem length clearance of 0.47 in behind the panel. Ensure the actuator length of 0.68 in suits your enclosure depth and operator access.

Panel mounting hardware included

The switch ships with panel mounting hardware so installation can proceed without sourcing separate nuts or washers. Silver coloured actuator and stem provide clear visibility in control panels. The two screw terminal connections simplify wiring for SPST on/off functions in approved electrical enclosures.

Highlights

  • SPST on/off control with 10 A at 250 V AC rating
  • 20 A at 125 V AC rating for higher-current low-voltage circuits
  • 3/4 hp motor-load rating for small motor switching
  • 50 in mounting hole fits standard panel cut-outs
  • CSA, RoHS and UL listed for code-compliant installations

Specifications

BrandEATON
TypeIndustrial Electrical Controls & Automation

Questions about this item

What is included with the Eaton 7546K36 toggle switch and what must be purchased separately?

The switch includes panel mounting hardware. Wiring, connectors, and an electrical box are not included and must be sourced separately.

Which rating should I use for the Eaton 7546K36 — 10 A at 250 V or 20 A at 125 V?

The switch carries both ratings simultaneously: 10 A at 250 V AC and 20 A at 125 V AC. Choose the rating that matches your circuit voltage.

How does the 3/4 hp rating on the Eaton 7546K36 translate to real motor loads?

The 3/4 hp rating means the switch can directly control a single-phase AC motor up to 3/4 horsepower at the rated voltages without a separate contactor.

More in Electrical Boxes

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.