We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight steel hydraulic fitting with zinc dicromate finish 2.73 in long

Eaton

Eaton 4412-8-8S vacuum accessory 13/32 in. ID 1/2-14 NPT male straight steel 2.73 in

SKU CH-RCNP-FN2D4 MPN 4412-8-8S

Straight steel hydraulic hose fitting with 13/32 in. ID and 1/2-14 NPT male thread

  • TypePart
  • Weight0.3
  • Straight male NPT thread connects directly to 1/2-14 ports
  • 13/32 in. hose ID matches dash-8 hose for secure fit
  • 73 in. overall length suits tight routing spaces
  • Zinc dicromate finish resists corrosion in hydraulic systems
  • Meets SAE 100R5 and FC 300 standards for hydraulic use

Hydraulic hose fitting — reusable straight connector

The Eaton 4412-8-8S is a reusable straight hydraulic hose fitting made of steel with a zinc dichromate finish. It connects a hose with a 13/32 in. inside diameter to a 1/2-14 NPT male thread. The fitting meets SAE 100R5 and FC 300 standards for hydraulic service.

Suited for field-assembly hydraulic repairs

Mechanics and maintenance teams who need a straight reusable fitting for 13/32 in. ID hose and 1/2-14 NPT ports can install this without crimping equipment. It is not for systems requiring angled connections, different thread standards, or hose sizes outside the dash 8 specification.

13/32 in. hose ID with 1/2-14 NPT male thread

The fitting accepts hydraulic hose with a 13/32 in. inside diameter and provides a 1/2-14 NPT male thread at a 60-degree seat angle. Overall length is 2.73 in., and the dash 8 size confirms compatibility with SAE 100R5 and FC 300 rated hose assemblies.

Highlights

  • Straight male NPT thread connects directly to 1/2-14 ports
  • 13/32 in. hose ID matches dash-8 hose for secure fit
  • 73 in. overall length suits tight routing spaces
  • Zinc dicromate finish resists corrosion in hydraulic systems
  • Meets SAE 100R5 and FC 300 standards for hydraulic use

Specifications

BrandEaton
Model4412-8-8S
TypePart
Weight0.3

Questions about this item

What is the maximum working pressure this Eaton 4412-8-8S fitting can handle under sustained use?

The fitting meets SAE 100R5 and FC 300 standards, which define the pressure ratings for the compatible hose assemblies used in sustained hydraulic applications.

Does the steel body and zinc dicromate finish affect heat dissipation during continuous hydraulic flow?

The steel construction with zinc dicromate finish provides standard thermal conductivity for hydraulic fittings; heat dissipation depends primarily on the fluid type, flow rate, and system reservoir capacity.

Which hose specifications must match this 1/2-14 NPT male fitting for a proper reusable connection?

You need a hose with a 13/32 in. inner diameter, dash size 8, built to SAE 100R5 or FC 300 standards to match the reusable straight fitting design.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.