Eagle Tool Us
Eagle Tool Us Flexible Drill Bit 1/2in Dia x 54in L pneumatic accessory
A 54-inch flexible drill bit with a 1/2-inch diameter reaches 52 inches deep for cable installation
- Split-point tip starts holes cleanly without wandering
- 54 in overall length reaches deep cavities and wall cavities
- 1/2 in drill bit diameter bores large holes for cable pulls
- 1/4 in shank with three flats locks securely in drill chucks
- Powder-coated finish resists corrosion during extended use
Flexible Cable Installer Bit
The Eagle Tool US EHS50054 is a split-point drill bit designed for cable installers and electricians pulling wire through framed walls. Its 54-inch overall length and 1/2-inch diameter allow deep reach between studs and joists without removing drywall. The flexible shaft navigates bends inside cavities where rigid bits cannot follow.
Powder-Coated Steel With 1/4-Inch Shank
A powder-coated finish protects the steel body during repeated contact with wood framing and insulation. The straight shank features three flats and a 1/4-inch diameter with a 3/16-inch hex section to prevent slipping in drill chucks or quick-change adapters. Maximum drilling depth reaches 52 inches, leaving room for chuck engagement.
Upgrade From Short Auger Or Spade Bits
Installers replacing 16-inch or shorter auger bits gain the ability to drill through multiple bays in a single pass. The jump is worth it when fishing cable across long spans or through insulated cavities where a flexible shaft follows the path. Buyers who need a rigid bit for precision joinery or metal drilling should choose a different tool.
Highlights
- Split-point tip starts holes cleanly without wandering
- 54 in overall length reaches deep cavities and wall cavities
- 1/2 in drill bit diameter bores large holes for cable pulls
- 1/4 in shank with three flats locks securely in drill chucks
- Powder-coated finish resists corrosion during extended use
Specifications
| Brand | EAGLE TOOL US |
|---|
Questions about this item
What shank interface does the 1/2 in bit use, and what hex size does it cap at?
The bit has a straight shank with three flats and a 3/16 in hex size for chuck grip.
What physical dimensions determine whether it fits the drilling space?
Overall length is 54 in with a maximum drilling depth of 52 in, and the shank diameter is 1/4 in.
How is the bit installed in the drill, and what step is often missed?
Insert the 1/4 in straight shank into the chuck, align the three flats with the jaws, and tighten securely so the flats seat properly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
