Eagle Tool Us
Eagle Tool Us ESP75072 Cable Installer Bit 3/4in 72in pneumatic accessory
A 72-inch carbon-steel cable installer bit with a 3/4-inch cutting diameter and 70-inch drilling depth for deep masonry runs
- Drill up to 70 in deep with the extended reach
- 72 in overall length clears long runs without extensions
- 3/4 in bit bores wide pathways for cable pulls
- 1/4 in hex shank locks securely in standard chucks
- Powder-coated carbon steel resists wear on masonry jobs
Cable installer bit for masonry
The Eagle Tool US ESP75072 is a screw-point drill bit made from carbon steel with a powder-coated finish. It measures 72 in overall length and has a 3/4 in drill bit diameter. The shank features a 1/4 in hex with three flats for secure chuck grip. Maximum drilling depth reaches 70 in for deep cable runs.
Shank design and coating
The straight shank with three flats prevents slippage in pneumatic or power drill chucks during extended use. Powder coating adds corrosion resistance and reduces friction when drilling through abrasive masonry materials. These features combine to maintain bit alignment and cutting efficiency over the full 70 in depth.
Compatibility checks before ordering
Verify that your drill chuck accepts a 1/4 in hex shank and that the tool provides enough torque for a 3/4 in bit in masonry. Confirm the work area allows a 72 in overall bit length and that the 70 in maximum drilling depth meets the required cable pathway. Ensure the material is suitable for a screw-point geometry.
Highlights
- Drill up to 70 in deep with the extended reach
- 72 in overall length clears long runs without extensions
- 3/4 in bit bores wide pathways for cable pulls
- 1/4 in hex shank locks securely in standard chucks
- Powder-coated carbon steel resists wear on masonry jobs
Specifications
| Brand | EAGLE TOOL US |
|---|
Questions about this item
How long will the 3/4 in drill bit last before it needs replacing?
The carbon steel bit wears with use; lifespan depends on material hardness and drilling frequency. Inspect the three-flat shank and powder coating regularly for damage.
What limits continuous drilling with the 72 in overall length bit?
Maximum drilling depth is 70 in. The 1/4 in hex shank and straight three-flat design transmit torque; motor power and bit temperature become limiting factors first.
Does the 1/4 in hex shank get hot or vibrate during all-day cable runs?
The powder-coated carbon steel body conducts heat; the 1/4 in shank hex size fits standard chucks, reducing slip. Vibration varies with hammer-drill mode and material density.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
