Eagle Tool Us
Eagle Tool Us ESP75036 Cable Installer Bit 3/4in 36in pneumatic accessory
Drills cable pathways up to 34 inches deep with a 36-inch carbon-steel bit and 1/4-inch hex shank
- Drills up to 34 in deep with 36 in overall length
- 3/4 in bit bores wide cable pathways in one pass
- 1/4 in hex shank locks securely into standard drill chucks
- Powder-coated carbon steel resists wear during repetitive drilling
- Screw-point tip pulls bit forward for faster hole starts
Cable Installer Bit 3/4in 36in
The Eagle Tool US ESP75036 is a pneumatic accessory designed for pulling cables through walls and ceilings. Its 36 inch overall length reaches deep cavities without requiring extensions. Electricians and low-voltage installers use it for residential and commercial wiring jobs.
34 inch maximum drilling depth
The bit drills up to 34 inches in a single pass, which determines whether it clears the stud bay or joist space you are working in. A 3/4 inch cutting diameter creates a clean hole for multiple cable runs. The 1/4 inch hex shank fits standard drill chucks and quick-change adapters.
Powder coated carbon steel under load
Carbon steel construction resists bending when the bit binds on knots or metal plates. The powder coating reduces friction during long pulls, so the bit runs cooler during sustained drilling. Three flats on the shank prevent slipping in the chuck when torque spikes.
Highlights
- Drills up to 34 in deep with 36 in overall length
- 3/4 in bit bores wide cable pathways in one pass
- 1/4 in hex shank locks securely into standard drill chucks
- Powder-coated carbon steel resists wear during repetitive drilling
- Screw-point tip pulls bit forward for faster hole starts
Specifications
| Brand | EAGLE TOOL US |
|---|
Questions about this item
How deep can the 3/4 in bit drill in a real installation?
The bit achieves a maximum drilling depth of 34 in, so it reaches through standard stud bays and top plates in one pass.
What does the 1/4 in hex shank limit in practice?
The 1/4 in hex shank fits standard quick-change chucks and limits torque to what a typical 1/4 in drive impact or drill can deliver.
Will the 36 in overall length clear my drill and still reach the work?
At 36 in overall length with a 1/4 in shank diameter, the bit extends well past the drill body, giving 34 in of usable reach for deep holes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
