Eagle Tool Us
Eagle Tool Us ESP56236 Cable Installer Bit 9/16in 36in pneumatic accessory
A 36-inch auger-style cable installer bit with a 9/16-inch cutting diameter drills up to 34 inches deep
- Drills up to 34 in deep for long cable runs
- 36 in overall length reaches through studs and joists
- 9/16 in auger bit bores clean holes in wood
- 3/16 in hex shank locks securely in drill chucks
- Powder-coated carbon steel resists wear on job sites
Cable installer bit for pneumatic drills
The Eagle Tool US ESP56236 is a 36 in auger-style drill bit designed for pulling cable through wood framing. It suits electricians and low-voltage installers who need a long, straight reach with a screw point for self-feeding.
9/16 in diameter with 34 in drilling depth
The bit cuts a 9/16 in hole and reaches a maximum drilling depth of 34 in. The 3/16 in hex shank with three flats locks into a pneumatic drill chuck without slipping. Powder coating reduces friction and resists corrosion during extended use.
Fits 3/16 in hex chucks; watch shank engagement
Insert the hex shank fully so all three flats seat against the chuck jaws. A partial grip will cause the bit to spin out under load. The 36 in overall length demands a steady hand to avoid wandering; brace the tool against the stud for a clean, straight bore.
Highlights
- Drills up to 34 in deep for long cable runs
- 36 in overall length reaches through studs and joists
- 9/16 in auger bit bores clean holes in wood
- 3/16 in hex shank locks securely in drill chucks
- Powder-coated carbon steel resists wear on job sites
Specifications
| Brand | EAGLE TOOL US |
|---|
Questions about this item
How deep can the 9/16 in bit actually drill in one pass?
The bit reaches a maximum drilling depth of 34 in, so a single pass can bore through studs or joists up to that thickness.
What does the 3/16 in hex shank mean for my drill chuck?
The 3/16 in hex shank with three flats locks into a standard 3/16 in chuck or quick-change adapter, preventing slip under high torque.
Will the 36 in overall length fit between floor joists in a typical crawlspace?
At 36 in long the bit needs at least that much straight clearance; measure the joist bay before starting to confirm it will rotate freely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
