Eagle Tool Us
Eagle Tool Us ESP56218 Cable Installer Bit 9/16in 18in Carbon Steel
A 9/16 inch split-point cable installer bit with a 3/16 inch hex shank drills to a 16 inch depth across an 18 inch overall length
- Drill 16 in deep with 18 in bit length
- Split point tip starts holes accurately without walking
- 3/16 in hex shank fits standard drill chucks securely
- Powder coating resists corrosion during extended job-site use
- Three-flat shank design prevents slipping under high torque
Cable installer bit for electricians
The Eagle Tool US ESP56218 is a split-point screw-point drill bit designed for cable installation work. Its 9/16 inch diameter creates holes suited for pulling wire through framing members. The carbon steel construction with powder coating resists wear during repetitive drilling tasks. This accessory targets professional electricians and low-voltage installers who need reliable hole-making in wood.
Fits standard drill chucks and extension shafts
The 3/16 inch hex shank with three flats locks securely into quick-change chucks and impact drivers without slipping. An 18 inch overall length and 16 inch maximum drilling depth reach through multiple studs or joists from a single entry point. The straight shank profile clears tight cavities where right-angle drills cannot operate. Users supply their own drill motor and any required extensions.
Powder coating reduces friction and corrosion
The factory-applied powder coat lowers drilling resistance compared to bare steel, easing the effort needed for deep holes. It also protects the bit surface from rust when stored in damp job-site conditions. No lubricants, guide bushings or specialised sharpening tools are included in the package. The bit arrives ready for immediate use with standard drilling equipment.
Highlights
- Drill 16 in deep with 18 in bit length
- Split point tip starts holes accurately without walking
- 3/16 in hex shank fits standard drill chucks securely
- Powder coating resists corrosion during extended job-site use
- Three-flat shank design prevents slipping under high torque
Specifications
| Brand | EAGLE TOOL US |
|---|
Questions about this item
How deep can the ESP56218 cable installer bit drill before reaching its limit?
The maximum drilling depth is 16 in, so sustained use stops at that depth.
How much heat or vibration builds up when running the 18 in carbon steel bit all day?
Powder coating and the straight three-flat shank reduce friction, keeping heat and vibration low during extended drilling.
What chuck size must my drill already have to fit the 3/16 in hex shank?
A drill chuck that accepts a 3/16 in hex shank is required for the ESP56218 bit to work.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
