Eagle Tool Us
Eagle Tool Us ESP50018 Flexible Drill Bit 1/2in 18in
A flexible cable drill bit with a 1/2 inch split-point tip, 18 inch overall length and 16 inch drilling depth for routing wires through cavities
- Flexible shaft reaches 18 in drilling depth
- Split-point tip starts holes without wandering
- Three-flat shank prevents slip in chuck
- Powder coating resists corrosion during use
- 16 in maximum drilling depth for long reach
Flexible Drill Bit 1/2 in 18 in
The Eagle Tool US flexible drill bit is a split-point screw-point cable bit designed for pulling wire through enclosed cavities. It measures 18 in overall length with a 1/2 in drill diameter and a 3/16 in hex shank. The powder-coated finish resists corrosion during extended use.
Electricians and low-voltage installers
This bit suits electricians and low-voltage installers who need to drill through studs, joists or plates and then pull cable back through the same hole. It will not suit users who require a rigid auger bit for clean entry holes in finished surfaces or who need a diameter larger than 1/2 in for conduit-sized openings.
16 in maximum drilling depth
The single specification that decides fit is the 16 in maximum drilling depth, which determines how far the bit can reach inside a wall or ceiling cavity. If the cavity exceeds this depth, the bit cannot complete the hole and a longer shaft is required.
Highlights
- Flexible shaft reaches 18 in drilling depth
- Split-point tip starts holes without wandering
- Three-flat shank prevents slip in chuck
- Powder coating resists corrosion during use
- 16 in maximum drilling depth for long reach
Specifications
| Brand | EAGLE TOOL US |
|---|
Questions about this item
How do I confirm the Eagle Tool US ESP50018 Flexible Drill Bit is drilling to the full 16 in maximum depth after setup?
Drill until the bit reaches the 16 in maximum drilling depth mark; the split point and screw point should pull the bit smoothly through wood or cable pathways without binding.
What comes with the Eagle Tool US ESP50018 Flexible Drill Bit and what must I supply separately?
The box contains the 18 in flexible drill bit with 1/2 in diameter and 3/16 in hex shank; you supply the drill motor and any extension or guide accessories.
Which Eagle Tool US flexible drill bit version should I choose for 1/2 in holes up to 16 in deep?
Choose the ESP50018 model with 1/2 in drill bit size, 18 in overall length and 16 in maximum drilling depth for that hole diameter and reach.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
