Eagle Tool Us
Eagle Tool Us EHS25024 Flexible Drill Bit 1/4 in x 24 in
A flexible 1/4 in auger bit for cable installation, 24 in long with a 3/16 in hex shank and 22 in drilling depth
- Auger tip pulls through wood fast
- 24 in overall length reaches deep cavities
- 22 in max drilling depth handles thick beams
- 3/16 in hex shank locks in standard chucks
- Powder coat resists rust and wear
Flexible drill bit for cable installation
The Eagle Tool US EHS25024 is an auger-style flexible drill bit designed for cable installers who need to bore through studs and joists inside finished walls. Its 24-inch overall length and 22-inch maximum drilling depth provide reach for typical residential framing tasks. The powder-coated finish helps resist corrosion during extended use.
1/4-inch diameter with three-flat shank
The single specification that determines fit is the 1/4-inch drill bit diameter paired with a 3/16-inch hex shank featuring three flats. This shank geometry prevents slippage in standard drill chucks and quick-change adapters. The straight shank design suits both corded and cordless drill drivers without requiring a specialised holder.
Reach and limits for electrical work
At 24 inches long, the bit comfortably handles cross-drilling through multiple stud bays or floor joists in a single pass. The 22-inch maximum drilling depth marks the practical limit before chip evacuation becomes difficult and bit deflection increases. Beyond that depth, a longer bit or an extension would be required to maintain control and hole quality.
Highlights
- Auger tip pulls through wood fast
- 24 in overall length reaches deep cavities
- 22 in max drilling depth handles thick beams
- 3/16 in hex shank locks in standard chucks
- Powder coat resists rust and wear
Specifications
| Brand | EAGLE TOOL US |
|---|
Questions about this item
How deep can the 24 in bit actually drill in a wall cavity?
The maximum drilling depth is 22 in, leaving a short section for chuck engagement.
What does the 3/16 in hex shank mean for my drill chuck?
The 3/16 in hex shank fits a standard 1/4 in quick‑change chuck or a 3/8 in three‑jaw chuck tightened on the flats.
Will the 24 in overall length clear standard stud bays?
At 24 in long the bit reaches through typical 16 in on‑centre stud bays with room to manoeuvre.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
