Eagle Tool Us
Eagle Tool Us EA50024 Cable Installer Bit 1/2in 24in
Auger-style cable installer bit with 1/2 in diameter, 24 in overall length and 22 in drilling depth
- Drill up to 22 in deep with auger-style tip
- 1/2 in bit diameter suits standard cable pulls
- 24 in overall length reaches through studs and joists
- 3/16 in hex shank locks securely in drill chuck
- Powder-coated carbon steel resists corrosion on job sites
Cable Installer Bit for Electricians
The Eagle Tool US EA50024 is a cable installer bit designed for pulling wire through framed walls and ceilings. Its auger-style tip pulls the bit through wood without needing excessive pressure. The 24 in overall length reaches through multiple stud bays in a single pass. This tool suits electricians and low-voltage installers who run cable in new construction or remodel work.
Check Chuck Capacity and Reach Before Buying
Verify that your drill chuck accepts a 3/16 in hex shank with three flats for a secure grip. The maximum drilling depth is 22 in, so ensure that length covers the thickest assembly you will encounter. The straight shank design requires a standard keyed or keyless chuck, not a quick-change impact driver collet. Confirm the 1/2 in cutting diameter matches the hole size your cable bundles require.
Powder-Coated Carbon Steel With Hex Shank
The bit is made from carbon steel with a powder-coated finish that resists corrosion during storage and on damp job sites. The 3/16 in hex shank with three flats prevents slipping in the chuck under high torque. The auger flute clears chips efficiently, reducing binding when drilling deep. The straight shaft allows easy withdrawal after the cable is attached to the pulling eye.
Highlights
- Drill up to 22 in deep with auger-style tip
- 1/2 in bit diameter suits standard cable pulls
- 24 in overall length reaches through studs and joists
- 3/16 in hex shank locks securely in drill chuck
- Powder-coated carbon steel resists corrosion on job sites
Specifications
| Brand | EAGLE TOOL US |
|---|
Questions about this item
What comes with the EA50024 cable installer bit and do I need any extra parts?
The bit ships as a single 24 in auger-style drill bit with a 3/16 in hex shank; no extra components are required for use.
Should I choose the 24 in length or a shorter version for my job?
This model is offered only in the 24 in overall length with a 22 in maximum drilling depth; select it when you need that reach.
How deep can the 1/2 in bit actually drill in a real installation?
The bit achieves a maximum drilling depth of 22 in, so it will bore through studs or joists up to that thickness.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
