Eagle Tool Us
Eagle Tool Us Dirt Auger Switch Bit 3/4in Dia 54in L pneumatic accessory
A pneumatic dirt auger bit with a three-quarter inch diameter and fifty-four inch length for deep drilling
- 3/4 in diameter suits standard post holes
- 54 in length reaches deep without extensions
- pneumatic power drives through compacted soil fast
- switch-bit design swaps augers in seconds
- new condition guarantees full factory performance
Eagle Tool US Dirt Auger Switch Bit
The Eagle Tool US Dirt Auger Switch Bit is a pneumatic accessory built for digging and soil penetration tasks. It suits operators who need a long-reach bit for powered earth-moving equipment. The 54 inch length provides extended reach into the ground. This new accessory is designed for direct attachment to compatible power heads.
Suits deep-hole drilling, not confined spaces
This bit suits contractors and landscapers drilling deep post holes or footings in open terrain. The 3/4 inch diameter creates a narrow bore ideal for specific anchoring or sampling jobs. Buyers needing wider diameters for fence posts or larger foundations should look at other auger bits. Workers operating in tight clearances or indoor environments will find the 54 inch length impractical.
54 inch overall length decides fit
The single specification that decides compatibility is the 54 inch overall length. The operator must verify the power head chuck accepts a 3/4 inch diameter shank. The reach must match the required hole depth without exceeding the machine stroke. No other dimensions or drive interfaces are supplied in the data.
Highlights
- 3/4 in diameter suits standard post holes
- 54 in length reaches deep without extensions
- pneumatic power drives through compacted soil fast
- switch-bit design swaps augers in seconds
- new condition guarantees full factory performance
Specifications
| Brand | EAGLE TOOL US |
|---|
Questions about this item
Which diameter and length of dirt auger bit suits my job?
This bit is 3/4 inch in diameter and 54 inches long, so it matches holes of that size and reach.
How does the 54 inch length perform when driven by a pneumatic tool?
The 54 inch shaft gives deep reach for post holes or soil sampling while the 3/4 inch cutting width keeps torque demand moderate for standard air drills.
What pneumatic connection does the ETD75054 use and what does it limit?
It fits a 3/4 inch hex drive common on pneumatic earth augers, so the coupling and the drill’s torque output set the practical depth and speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
