E-buy
E-buy AC adapter 18.5V 3.5A 65W for HP ZT3001 ZT3007 ZT3010
Replacement 65 W power supply delivering 18.5 V at 3.5 A for compatible HP laptops, includes AC cord with 4.8 mm barrel connector
- AC Adapter Voltage18.5V
- AC Adapter Current3.5A
- AC Adapter Output Power65W
- Delivers 65W at 18.5V 3.5A for reliable laptop charging
- Accepts 100–240V 50–60Hz input for worldwide use
- Includes AC power cord for immediate setup
- 7 mm inner and 4.8 mm outer connector fits listed HP models
65 W 18.5 V adapter for HP ZT series
This 65 W AC adapter delivers 18.5 V at 3.5 A for HP ZT3001, ZT3007 and ZT3010 laptops. It accepts 100–240 V input at 50–60 Hz and includes the mains power cord. The barrel connector has a 1.7 mm inner diameter and 4.8 mm outer diameter.
Simple plug-in replacement with barrel fit check
Installation is a direct swap: connect the barrel tip to the laptop and the cord to a wall socket. The only common issue is a loose or intermittent charge caused by a worn DC jack on the laptop side rather than the adapter itself.
Highlights
- Delivers 65W at 18.5V 3.5A for reliable laptop charging
- Accepts 100–240V 50–60Hz input for worldwide use
- Includes AC power cord for immediate setup
- 7 mm inner and 4.8 mm outer connector fits listed HP models
Specifications
| AC Adapter Voltage | 18.5V |
|---|---|
| AC Adapter Current | 3.5A |
| AC Adapter Output Power | 65W |
Questions about this item
How can I confirm the adapter is delivering 18.5V 3.5A after I plug it in?
The brick should power the laptop and charge the battery without error messages; a multimeter on the 1.7 mm / 4.8 mm tip will read 18.5 V under load.
Does the package include the AC power cord or only the brick?
The AC power cord is included in the box; no separate cable purchase is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



