We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
15.6 inch matte laptop display panel with 30 pin CCFL connector

E-buy

E-buy 15.6LCD 1366x768 CCFL 30-pin TJ65-DM-006TK laptop screen

SKU CH-JC4G-1XES5

A 15.6-inch WXGA laptop display with CCFL backlight and 30-pin connector for Packard Bell EasyNote models

  • Specifications1366 x 768
  • 6-inch WXGA display restores sharp 1366 x 768 visuals
  • CCFL backlight with single bulb matches original laptop lighting
  • 30-pin connector fits Packard Bell EasyNote TJ65 without adapters
  • Compatible with nine manufacturer part numbers for easy sourcing
  • New Grade A+ panel tested and fully working guarantee

15.6-inch CCFL laptop display

This 15.6-inch WXGA panel replaces the screen in a Packard Bell EasyNote TJ65-DM-006TK. It delivers a 1366 by 768 resolution through a single CCFL backlight bulb. The 30-pin connector mates directly with the laptop’s existing cable. Buyers needing an LED-backlit panel or a different pin count cannot use this part.

CCFL backlight behaviour under load

The single CCFL bulb reaches full brightness after a short warm-up period and maintains steady output during extended sessions. Unlike LED backlights, CCFL tubes exhibit a gradual dimming curve over thousands of hours rather than abrupt failure. The inverter board supplied with the laptop drives the bulb at its rated current. Users who require instant-on brightness at cold temperatures will find the warm-up delay noticeable.

30-pin CCFL interface limits

The 30-pin CCFL socket carries power for the backlight inverter and the LVDS video signal in one connector. It does not support LED drive voltages or eDP signalling, so the panel cannot be adapted to newer laptops without an active converter board. The pinout matches the listed compatible part numbers exactly. Installers must verify the laptop’s original screen uses the same 30-pin CCFL layout before ordering.

Highlights

  • 6-inch WXGA display restores sharp 1366 x 768 visuals
  • CCFL backlight with single bulb matches original laptop lighting
  • 30-pin connector fits Packard Bell EasyNote TJ65 without adapters
  • Compatible with nine manufacturer part numbers for easy sourcing
  • New Grade A+ panel tested and fully working guarantee

Specifications

Model15.6LCD
Specifications1366 x 768

Questions about this item

Does the single CCFL bulb in the 15.6-inch panel generate noticeable heat or noise when the laptop runs all day?

The screen uses one CCFL backlight bulb, which runs warmer and can produce a faint high-pitched hum compared with LED panels, but the laptop’s own cooling system normally masks both heat and noise during extended use.

Which connectors and mounting points must my Packard Bell EasyNote already have for the 30-pin CCFL socket to fit?

Your chassis needs the 30-pin CCFL video connector and matching inverter plug, plus the original screw brackets spaced for a 15.6-inch 13.6-by-7.6-cm frame; the panel will not work with LED-only harnesses or 40-pin sockets.

Will this 1366-by-768 CCFL panel drive correctly from the older graphics chip in my EasyNote TJ65 without a converter cable?

Yes — the 30-pin CCFL interface matches the TJ65’s native LVDS output, so the existing GPU drives the 1366 x 768 resolution directly without any conversion cable or signal adapter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.