We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
15.6 inch CCFL laptop display panel with 30-pin connector, matte finish

E-buy

E-buy 15.6" WXGA CCFL laptop screen 30-pin for Packard Bell EasyNote TJ66-DT-102SP

SKU CH-X64A-1FHZY

15.6-inch WXGA CCFL laptop display with 30-pin connector fits Packard Bell EasyNote TJ66-DT-102SP and compatible part numbers

  • Specifications1366 x 768
  • 6-inch WXGA display delivers sharp 1366 x 768 visuals
  • CCFL backlight with single bulb matches original laptop lighting
  • 30-pin connector fits Packard Bell EasyNote TJ66-DT-102SP directly
  • Replaces LTN156AT01 and eight other manufacturer part numbers
  • New Grade A+ panel tested for full working guarantee

Replacement screen for Packard Bell EasyNote TJ66

This 15.6-inch WXGA panel is built as a direct replacement for the Packard Bell EasyNote TJ66-DT-102SP. It matches the original 1366 x 768 resolution and 30-pin CCFL connector. The unit is new and carries a Grade A+ quality rating. It suits owners restoring that specific laptop model.

CCFL backlight and 30-pin interface constraints

The display uses a single-bulb CCFL backlight rather than LED, so the inverter board in the laptop must support that technology. A 30-pin CCFL socket carries the video signal; the pin count and signalling must match the original panel exactly. No conversion cable is included or supported. Compatible part numbers include LTN156AT01 and several LP156WH1 variants.

Verify lid dimensions and connector before ordering

Measure the active area of the old panel to confirm it is 13.6 by 7.6 inches and check that the cable ends in a 30-pin CCFL plug. Ensure the mounting brackets on the replacement align with the laptop lid screw points. Cross-reference the part number on the original screen against the listed compatible numbers.

Highlights

  • 6-inch WXGA display delivers sharp 1366 x 768 visuals
  • CCFL backlight with single bulb matches original laptop lighting
  • 30-pin connector fits Packard Bell EasyNote TJ66-DT-102SP directly
  • Replaces LTN156AT01 and eight other manufacturer part numbers
  • New Grade A+ panel tested for full working guarantee

Specifications

Model15.6LCD
Specifications1366 x 768

Questions about this item

Which 15.6 inch WXGA panel fits my Packard Bell EasyNote TJ66-DT-102SP?

This 15.6 inch 1366 x 768 CCFL screen with a 30 pin connector matches part numbers LTN156AT01, LP156WH1-TLC1, LP156WH1-TLA1, LP156WH1-TLA2, N156B3-L01, N156B3-L02, N156B3-L02 REV.C1, CLAA156WA01A and CLAA156WA01.

What does the 1366 x 768 resolution look like on a 15.6 inch display?

The WXGA panel gives a 13.6 by 7.6 inch active area at 1366 x 768 pixels, so text and video appear at native HD clarity without scaling.

How does the 30 pin CCFL interface limit brightness or compatibility?

The single bulb CCFL backlight runs through the 30 pin socket, so the panel works only in laptops wired for CCFL and cannot be used with LED inverter boards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.