We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
15.6-inch LCD panel with 30-pin CCFL connector

E-buy

E-buy 15.6 LCD Monitor Accessory for Packard Bell EasyNote TJ67-DT-072FR

SKU CH-QXKQ-BAAK1

15.6-inch WXGA CCFL laptop display panel with 30-pin connector for compatible Packard Bell models

  • Specifications1366 x 768
  • 6-inch WXGA display delivers 1366 x 768 HD clarity
  • CCFL backlight with 1-bulb design matches original laptop spec
  • 30-pin CCFL socket ensures direct plug-in replacement
  • Compatible with Packard Bell EasyNote TJ67-DT-072FR and multiple part numbers
  • New Grade A+ panel tested and verified for full working order

15.6-inch WXGA replacement panel

This 15.6-inch CCFL-backlit LCD is built as a direct screen replacement for the Packard Bell EasyNote TJ67-DT-072FR. It delivers a native WXGA resolution of 1366 x 768 and uses a 30-pin CCFL connector. The panel is graded New Grade A+ and carries a three-year warranty.

Installation notes and common issues

The screen fits laptops only and requires a 30-pin CCFL socket on the motherboard; it is not compatible with LED panels or conversion cables. Installers must verify the part number against the listed compatibles such as LTN156AT01 or LP156WH1-TLC1 before fitting. A mismatched connector or backlight type is the usual cause of a non-working swap.

Sustained-use behaviour

The single CCFL bulb provides steady illumination during extended sessions, though CCFL technology naturally exhibits a gradual brightness decline over very long operating periods. The panel is fully tested and verified for continuous operation at its specified resolution. No additional cooling or power considerations beyond the laptop's original design are required.

Highlights

  • 6-inch WXGA display delivers 1366 x 768 HD clarity
  • CCFL backlight with 1-bulb design matches original laptop spec
  • 30-pin CCFL socket ensures direct plug-in replacement
  • Compatible with Packard Bell EasyNote TJ67-DT-072FR and multiple part numbers
  • New Grade A+ panel tested and verified for full working order

Specifications

Model15.6LCD
Specifications1366 x 768

Questions about this item

How do I confirm the 15.6-inch 1366 x 768 CCFL panel is working correctly after installation?

Power on the Packard Bell EasyNote TJ67-DT-072FR and verify the 15.6-inch display shows a stable 1366 x 768 image without flicker or dead pixels; the single CCFL backlight should illuminate evenly across the 13.6 x 7.6-inch active area.

What comes in the box and what extra parts are needed for the 30-pin CCFL screen?

The box contains the new Grade A+ 15.6-inch LTN156AT01-compatible LCD panel with attached 30-pin CCFL connector; no separate inverter or conversion cable is required because the screen uses the laptop's existing CCFL backlight circuit.

Which compatible part number should I choose for the Packard Bell EasyNote TJ67-DT-072FR?

All listed part numbers — LTN156AT01, LP156WH1-TLC1, LP156WH1-TLA1, LP156WH1-TLA2, N156B3-L01, N156B3-L02, N156B3-L02 REV.C1, CLAA156WA01A, CLAA156WA01 — are cross-referenced for this model; select the one that matches the sticker on your original screen.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.