We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

E-buy

E-buy 15.6 LCD 1366 x 768 CCFL for Toshiba Satellite Pro L500-1CG monitor accessory

SKU CH-49PZ-AE15X

A 15.6-inch CCFL laptop screen with 1366 x 768 resolution and a 30-pin connector for compatible Toshiba Satellite Pro models

  • Specifications1366 x 768
  • 6-inch WXGA display gives 1366 x 768 HD clarity
  • CCFL backlight with single bulb matches original laptop lighting
  • 30-pin CCFL socket fits without adapters or conversion cables
  • Compatible with LTN156AT01 and nine other manufacturer part numbers
  • New Grade A+ panel tested and verified for full working order

Exact-fit replacement

This 15.6-inch WXGA LCD panel is built as a direct replacement for the Toshiba Satellite Pro L500-1CG. It matches the original 1366 x 768 resolution and 30-pin CCFL connector so the display installs without adapters or cable changes. Buyers needing a different connector count, LED backlight or higher resolution should choose another part.

CCFL thermal profile

The single CCFL bulb runs cooler than older dual-bulb designs and draws modest power from the laptop inverter. Fan noise stays at the system baseline because the panel adds no active cooling. Users who require the lower heat output of a native LED panel will not get that benefit here.

30-pin CCFL socket

The video signal connector is a 30-pin CCFL socket; the panel will not work with 40-pin LED harnesses or eDP interfaces. Verify the laptop's cable pin count before ordering to avoid a mismatch.

Highlights

  • 6-inch WXGA display gives 1366 x 768 HD clarity
  • CCFL backlight with single bulb matches original laptop lighting
  • 30-pin CCFL socket fits without adapters or conversion cables
  • Compatible with LTN156AT01 and nine other manufacturer part numbers
  • New Grade A+ panel tested and verified for full working order

Specifications

Model15.6LCD
Specifications1366 x 768

Questions about this item

How do I connect the 30 pin CCFL socket when installing this 15.6-inch screen?

Align the 30 pin CCFL socket on the panel with the laptop's matching connector, press firmly until it seats fully, then route the single CCFL bulb cable away from hinge brackets before reassembling the bezel.

Which component will need replacement first on this CCFL panel?

The single CCFL backlight bulb dims over time; expect to replace the bulb or the entire panel once brightness drops below usable levels.

What is the first limit reached during sustained use of this 1366 x 768 display?

Continuous operation heats the CCFL inverter and bulb, causing gradual brightness loss and colour shift before any pixel or signal issue appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.