We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
15.6-inch WXGA LCD panel with 30-pin CCFL connector, matte finish

E-buy

E-buy 15.6-inch WXGA LCD screen for Packard Bell EasyNote TJ65-DT-201PT

SKU CH-V9DM-Q16TQ

A 15.6-inch WXGA replacement panel with 1366 x 768 resolution and a 30-pin CCFL connector for compatible Packard Bell EasyNote models

  • Specifications1366 x 768
  • 6-inch WXGA display delivers 1366 x 768 HD clarity
  • CCFL backlight with single bulb matches original laptop lighting
  • 30-pin CCFL connector ensures direct fit without adapters
  • Compatible with nine manufacturer part numbers including LTN156AT01
  • New Grade A+ panel tested and verified for full working order

15.6-inch WXGA replacement panel

This 15.6-inch WXGA LCD panel replaces the display in a Packard Bell EasyNote TJ65-DT-201PT laptop. It delivers a 1366 x 768 resolution on a 13.6 by 7.6 inch active area. The screen uses a CCFL backlight with a single bulb and connects through a 30-pin CCFL socket. It matches part numbers including LTN156AT01 and LP156WH1-TLC1.

CCFL backlight thermals and power

The single CCFL bulb draws modest power during normal operation and runs cooler than multi-lamp designs. Heat stays low enough for the laptop’s existing cooling to manage without extra airflow. Acoustic output is negligible because no inverter fan is present. The 30-pin connector carries both video and backlight power on the original cable.

Fits the original lid and hinge

The panel slots into the EasyNote TJ65-DT-201PT lid using the factory mounting points and the original 30-pin cable. No adapter board or conversion cable is required because the connector and pin-out match the listed compatible part numbers. Re-use the existing bezel, hinges and inverter to complete the repair. Buyers who need an LED backlight or a different connector type cannot use this screen.

Highlights

  • 6-inch WXGA display delivers 1366 x 768 HD clarity
  • CCFL backlight with single bulb matches original laptop lighting
  • 30-pin CCFL connector ensures direct fit without adapters
  • Compatible with nine manufacturer part numbers including LTN156AT01
  • New Grade A+ panel tested and verified for full working order

Specifications

Model15.6LCD
Specifications1366 x 768

Questions about this item

How do I install the 30 pin CCFL socket on this 15.6-inch screen?

Align the 30 pin CCFL socket with the motherboard header, press straight down until the latch clicks, then secure the inverter cable; the step most people miss is routing the pink and white backlight wires away from the hinge so they do not pinch when the lid closes.

Which component will need replacement first on this CCFL backlight panel?

The single CCF bulb ages faster than the liquid-crystal layer; after several thousand hours the white point yellows and brightness drops, so the bulb or the entire 15.6LCD assembly is the part you will swap first.

What limit appears first during a long session on this WXGA display?

The CCFL inverter runs hotter than an LED driver, so sustained maximum brightness on the 1366 x 768 panel typically hits a thermal throttle point that dims the backlight before any pixel-response issue shows up.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.