We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
15.6 inch WXGA CCFL LCD panel with 30 pin connector

E-buy

E-buy 15.6-inch WXGA HD CCFL LCD screen 30-pin HP DV6-2171SL

SKU CH-E9V2-4MDBB

15.6-inch WXGA HD CCFL laptop display with 1366 x 768 resolution and 30-pin connector for HP DV6-2171SL compatibility

  • Specifications1366 x 768
  • 6-inch WXGA display delivers 1366 x 768 resolution
  • CCFL backlight with single bulb provides consistent brightness
  • 30-pin CCFL socket matches original laptop connector
  • Compatible with LTN156AT01 and nine other part numbers
  • Tested and verified working with three-year coverage

15.6-inch WXGA CCFL panel for HP DV6-2171SL

This 15.6-inch CCFL LCD delivers a 1366 x 768 WXGA resolution on a 13.6 by 7.6 inch active area. It is built as a direct replacement for the HP DV6-2171SL laptop and matches part numbers such as LTN156AT01 and LP156WH1-TLC1. The screen uses a single CCFL backlight bulb and a 30-pin CCFL video connector. Buyers needing an LED-backlit panel or a different connector type should look elsewhere.

Installing the 30-pin CCFL screen

Installation requires opening the laptop lid assembly, disconnecting the old 30-pin CCFL cable and routing the new panel's single CCFL bulb wire to the inverter. The 30-pin socket is keyed, but forcing it can bend pins, so align carefully before pressing. A common issue is forgetting to reconnect the inverter cable, which leaves the backlight dark even when the image signal is present. The panel is tested before shipping, so a non-working backlight usually points to a cable or inverter fault.

Check your laptop before ordering the 15.6 WXGA CCFL

Verify that your machine uses a CCFL backlight with a 30-pin video connector, not an LED panel with a 40-pin or other interface. Confirm the native resolution is 1366 x 768 WXGA; a different resolution will not match the display timing. Cross-reference your original screen part number against the compatible list such as N156B3-L01 or CLAA156WA01A. This part is for laptops only and will not fit desktop monitors or all-in-one units.

Highlights

  • 6-inch WXGA display delivers 1366 x 768 resolution
  • CCFL backlight with single bulb provides consistent brightness
  • 30-pin CCFL socket matches original laptop connector
  • Compatible with LTN156AT01 and nine other part numbers
  • Tested and verified working with three-year coverage

Specifications

Model15.6LCD
Specifications1366 x 768

Questions about this item

How can I confirm the 15.6-inch WXGA display is working correctly after installing it in my HP DV6-2171SL?

Power on the laptop and verify the panel shows a stable 1366 x 768 image with even backlight across the 13.6 by 7.6 inch area; no flicker or dead pixels means the CCFL bulb and 30-pin connector are seated properly.

What comes in the box with this 15.6-inch CCFL LCD and what must I source separately?

The package contains the 15.6-inch WXGA panel with its 30-pin CCFL socket and the single CCFL bulb already fitted; you will need to supply the inverter board and any mounting brackets or bezel clips specific to the HP DV6-2171SL chassis.

Which compatible part number should I choose for a direct replacement in the HP DV6-2171SL?

Match the original panel's sticker to one of the listed numbers — LTN156AT01, LP156WH1-TLC1, LP156WH1-TLA1, LP156WH1-TLA2, N156B3-L01, N156B3-L02, N156B3-L02 REV.C1, CLAA156WA01A or CLAA156WA01 — to guarantee the 30-pin CCFL interface and 1366 x 768 resolution align.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.