We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
15.6-inch WXGA CCFL laptop screen with 30-pin connector

E-buy

E-buy 15.6-inch WXGA CCFL Laptop Screen 30-pin for Packard Bell EasyNote TM87

SKU CH-6RX5-HFQ6V

A 15.6-inch WXGA CCFL panel with 1366 x 768 resolution and 30-pin connector for Packard Bell EasyNote TM87 laptops

  • Specifications1366 x 768
  • 6-inch WXGA display delivers sharp 1366 x 768 visuals
  • CCFL backlight matches original 1-bulb design for true colour
  • 30-pin connector fits Packard Bell EasyNote TM87 directly
  • Compatible with LTN156AT01 and nine other part numbers
  • New Grade A+ panel tested and fully working

What this screen replaces

This 15.6-inch WXGA CCFL panel is built as a direct replacement for the Packard Bell EasyNote TM87. It matches the original 1366 x 768 resolution and 30-pin CCFL connector so the laptop recognises it without extra adapters. Buyers who need a different backlight type, a higher resolution or a LED conversion kit will not be served by this part.

Fitting the panel

Installation follows the usual laptop disassembly: remove the bezel, disconnect the old 30-pin cable, swap the panel and reconnect. The single CCFL bulb and inverter cable must seat firmly or the backlight will flicker or stay dark. Forcing the connector or skipping the inverter hookup are the most common reasons a tested screen appears dead on first boot.

CCFL interface limits

The 30-pin CCFL interface caps the panel at WXGA 1366 x 768 and requires a working high-voltage inverter that the laptop must supply. No LED driver or conversion cable is included, so the screen cannot run on a LED-only motherboard. The 15.6-inch form factor and 13.6 by 7.6 inch active area fix the physical fit to the original chassis.

Highlights

  • 6-inch WXGA display delivers sharp 1366 x 768 visuals
  • CCFL backlight matches original 1-bulb design for true colour
  • 30-pin connector fits Packard Bell EasyNote TM87 directly
  • Compatible with LTN156AT01 and nine other part numbers
  • New Grade A+ panel tested and fully working

Specifications

Model15.6LCD
Specifications1366 x 768

Questions about this item

How can I verify the 15.6-inch WXGA CCFL panel is working correctly after installation?

Power on the Packard Bell EasyNote TM87 and confirm the 1366 x 768 resolution displays without flicker, dead pixels or backlight bleed across the 13.6 x 7.6 inch active area.

What comes in the box and what must I source separately for the 30-pin CCFL screen?

The box contains the 15.6-inch LTN156AT01-compatible panel with 30-pin CCFL socket; you must supply the CCFL inverter and any mounting brackets or bezel clips not reused from the original assembly.

Which compatible part number should I choose for the Packard Bell EasyNote TM87?

Match the sticker on your original panel to the listed numbers — LTN156AT01, LP156WH1-TLC1, LP156WH1-TLA1, LP156WH1-TLA2, N156B3-L01, N156B3-L02, N156B3-L02 REV.C1, CLAA156WA01A or CLAA156WA01 — and order that exact match.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.