We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

E-buy

E-buy 15.6-inch laptop screen 1366x768 CCFL 30-pin TR81-SB-125FR

SKU CH-JTZM-PVZG2

A 15.6-inch CCFL replacement panel with 1366x768 resolution and a 30-pin connector for the Packard Bell EasyNote TR81-SB-125FR

  • Specifications1366 x 768
  • 6-inch WXGA display restores crisp 1366 x 768 visuals
  • CCFL backlight matches original panel for true colour balance
  • 30-pin connector fits Packard Bell EasyNote TR81-SB-125FR directly
  • Replaces ten compatible part numbers including LTN156AT01 and LP156WH1-TLC1
  • Fully tested Grade A+ panel with three-year guarantee

Replacement Screen for 15.6-inch Packard Bell

This new 15.6-inch WXGA panel matches the original 1366x768 resolution and CCFL backlight used in the Packard Bell EasyNote TR81-SB-125FR. It arrives as a Grade A+ component with a three-year guarantee and has been fully tested before dispatch. The part replaces several manufacturer references including LTN156AT01 and LP156WH1-TLC1. Buyers needing a higher-resolution or LED-backlit display should look elsewhere.

30-pin CCFL Connector and Daily Handling

The screen uses a single-bulb CCFL backlight driven through a 30-pin CCFL socket, so the laptop must already support this older lighting technology. No conversion cable is included, meaning the existing inverter and cable harness must be reused without adapters. The 13.6 by 7.6 inch wide-format glass fits the original chassis mounting points for a direct swap. Installers without CCFL experience or inverter-testing tools may find the repair more involved than LED equivalents.

Included Grade A+ Assurance

Each unit ships with a Fully Working Guarantee backed by a three-year or 900-day warranty period that covers the panel itself. The supplier confirms compatibility across nine listed part numbers, reducing the risk of ordering a mismatched variant. No additional brackets, tools or software are bundled, so the installer must supply any bezel clips or adhesive strips required by the specific chassis. Users who expect a complete kit with cables or mounting hardware will need to source those separately.

Highlights

  • 6-inch WXGA display restores crisp 1366 x 768 visuals
  • CCFL backlight matches original panel for true colour balance
  • 30-pin connector fits Packard Bell EasyNote TR81-SB-125FR directly
  • Replaces ten compatible part numbers including LTN156AT01 and LP156WH1-TLC1
  • Fully tested Grade A+ panel with three-year guarantee

Specifications

Model15.6LCD
Specifications1366 x 768

Questions about this item

Does the 30-pin CCFL socket limit the panel to the 1366 x 768 WXGA resolution?

Yes, the 30-pin CCFL connector carries the WXGA signal at 1366 x 768 pixels for this 15.6-inch panel.

Will this 15.6-inch CCFL screen fit the Packard Bell EasyNote TR81-SB-125FR chassis without adapter brackets?

The panel matches the original 15.6-inch wide dimensions of 13.6 by 7.6 inches and uses the factory 30-pin CCFL socket, so it mounts directly.

What is the installation sequence for the 1-Bulb CCFL backlight and the step most people miss?

Disconnect the battery, remove the bezel, swap the panel, reconnect the 30-pin video cable and the separate inverter plug for the single CCFL bulb, then test before reassembling; the missed step is forgetting the inverter connector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.