Dyno Racing
Dyno Racing Oil Pressure Gauge 52mm 0-100 Psi 1/8 NPT White LED
Measures oil pressure from 0 to 100 psi with a white LED display in a 52 mm gauge for 12 V vehicles
- TypeGauges
- Gauge TypeOil Pressure
- White LED display for clear night reading
- 52mm diameter fits standard gauge pods
- Measures 0 to 100 psi oil pressure
- 1/8 NPT sensor thread for direct engine mounting
- 115mm sensor wire simplifies routing
Oil Pressure Gauge 52mm
This 52 mm oil pressure gauge is built for drivers who want a clear view of engine oil pressure in most 12 V vehicles. A white LED display on a black face gives high-contrast readings day or night. The kit includes the gauge, a 1/8 NPT sensor and mounting hardware for a straightforward installation.
0-100 Psi Measurement Range
The gauge reads from 0 to 100 Psi, covering normal operating pressure and providing headroom for high-performance engines. It runs on 12 V DC with a maximum draw of 0.3 A and tolerates a 10-15 V supply range. The sensor wire is 115 mm (4.5 in) long, so the sensor must be mounted close to the gauge location.
1/8 NPT Sensor and 12 V Power
The included sensor uses a 1/8 NPT thread, which fits many engine blocks and adapter fittings; verify thread compatibility before purchase. A 12 V electrical system is required, and professional installation is highly recommended to ensure accurate readings and a secure seal. Builders needing a different pressure range, metric units or a longer sensor lead will need a different gauge.
Highlights
- White LED display for clear night reading
- 52mm diameter fits standard gauge pods
- Measures 0 to 100 psi oil pressure
- 1/8 NPT sensor thread for direct engine mounting
- 115mm sensor wire simplifies routing
Specifications
| Type | Gauges |
|---|---|
| Gauge Type | Oil Pressure |
Questions about this item
Will the 1/8 NPT sensor thread fit the existing port on my older engine block?
The sensor uses a 1/8 NPT thread, a common size on many engines; verify your block's port matches before installing.
How can I confirm the white LED display is reading correctly once wired to a 12 V system?
With the ignition on, the gauge should illuminate and show 0 psi at idle, then rise smoothly as oil pressure builds up to 100 psi.
Does the package include the sensor and wiring, or must I buy them separately?
The box contains the 52 mm gauge, the 1/8 NPT sensor, a 115 mm wire harness and an English manual — no extra parts required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
