Dyno Racing
Dyno Racing 2" 52mm Oil Pressure Gauge Smoke Lens 0-100 PSI 1/8 NPT Sensor
Monitors engine oil pressure from zero to one hundred PSI with a fifty-two millimetre smoke-tint lens, red LED needle and white LED display that stays clear at night.
- TypeGauges
- Gauge TypeOil Pressure
- Smoke tint lens by day, clear LED visibility at night
- Red LED illuminated needle for instant pressure reading
- 0-100 PSI range with 1/8 NPT sensor for direct monitoring
- 12 V DC operation, max 0.3 A draw
- 52 mm diameter fits standard gauge pods
Gauge Purpose
The Dyno Racing 2" 52mm oil pressure gauge suits drivers who want a dedicated cockpit readout for engine lubrication health. It targets enthusiasts adding a racing-style instrument to a 12 V vehicle without relying on factory warning lights alone. Professional installation is highly recommended. The kit includes the gauge, a 1/8 NPT sensor and mounting hardware.
Electrical Limits
Operation requires a 12 V DC supply between 10 V and 15 V, drawing a maximum of .3 A. Voltages outside this range or insufficient current will cause erratic readings or prevent the LED display and red illuminated needle from functioning. The smoke tint lens stays readable in daylight while the bright white LEDs take over at night.
Measurement Headroom
The sensor covers 0 to 100 psi, giving clear visibility from idle pressure through high-load conditions. Pressures beyond 100 psi exceed the calibrated range and will not be displayed accurately. The 1/8 NPT thread fits common engine ports, but the single-channel design cannot monitor additional fluids such as fuel or transmission oil.
Highlights
- Smoke tint lens by day, clear LED visibility at night
- Red LED illuminated needle for instant pressure reading
- 0-100 PSI range with 1/8 NPT sensor for direct monitoring
- 12 V DC operation, max 0.3 A draw
- 52 mm diameter fits standard gauge pods
Specifications
| Type | Gauges |
|---|---|
| Gauge Type | Oil Pressure |
Questions about this item
Should I pick the 52 mm or 2 inch size for my dashboard?
They are the same gauge — 52 mm equals 2 inches — so choose whichever cut-out your panel has.
What does the 0-100 PSI range tell me while the engine is running?
It shows live oil pressure from zero up to 100 PSI so you can spot pressure loss at idle or over-pressure on cold starts.
How does the 1/8 NPT sensor thread limit installation options?
The sensor screws into any 1/8 NPT port; you need an adapter if your block uses a different thread size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
