Dyno Racing
Dyno Racing 11 in 1 Rally 7 Colors 6.5 inch Digital Gauge DO926
A 6.5 inch LCD race dashboard shows 11 functions including RPM, speed, oil pressure, oil temperature, water temperature, boost, air-fuel ratio, EGT, voltage, odometer, trip and 0-100 km/h testing.
- TypeInstrument Clusters
- Gauge TypeTachometer
- 11 functions on one 6.5 inch display
- 7 selectable backlight colours improve readability
- 9000 RPM limit with four shift-warning LEDs
- Waterproof construction suits all 12V vehicles
- Low-power LCD with manual dimmer extends battery life
Race-ready 11-function dashboard
The Dyno Racing DO926 is a 6.5 inch digital gauge cluster that combines eleven readouts in one waterproof unit. It covers RPM up to 9000, speed, oil pressure, oil temperature, water temperature, boost, air-fuel ratio, exhaust gas temperature, voltage, odometer, trip and a 0-100 km/h test mode. The low-consumption LCD offers seven selectable backlight colours and eleven backlight modes, with a manual dimmer and sequential LED shift lights. It runs on 9V-16V systems and supports 1-8 cylinder engines.
Track-day drivers and custom builders
This unit suits owners who want a single, compact display for all critical engine and chassis data during competition or spirited road use. The integrated sensor kit and alarm functions for speed, RPM, temperatures, pressure, boost and voltage reduce the need for separate gauges. Buyers who only need a basic tachometer or a simple speedometer will find the feature set excessive. Vehicles with electrical systems outside the 9V-16V range or engines with more than eight cylinders cannot use this gauge.
Pre-installation checklist
Verify that the vehicle uses a 12V negative-ground electrical system within the 9V-16V operating window. Confirm the engine has between one and eight cylinders so the RPM signal is compatible. Ensure there is a suitable mounting location for a 6.5 inch display and that the included harness can reach the required sensor points for oil pressure, oil temperature, water temperature, boost, air-fuel ratio and exhaust gas temperature. Check that the wiring plan accommodates the sequential LED shift lights and the two side-mounted control buttons.
Highlights
- 11 functions on one 6.5 inch display
- 7 selectable backlight colours improve readability
- 9000 RPM limit with four shift-warning LEDs
- Waterproof construction suits all 12V vehicles
- Low-power LCD with manual dimmer extends battery life
Specifications
| Type | Instrument Clusters |
|---|---|
| Gauge Type | Tachometer |
Questions about this item
Will the gauge cluster operate directly from my car's 12 V electrical system without an extra regulator?
Yes, the unit accepts an operating voltage of 9 V to 16 V, so it connects straight to any standard 12 V vehicle supply.
Can I keep my factory speed sensor and simply add this dash for RPM, boost and temperatures?
The kit includes its own high-precision sensor harness for all eleven functions, so you wire the supplied sensors rather than tapping the original speed signal.
How do I verify the 7-colour backlight and four shift-light LEDs are functioning correctly after installation?
Power the gauge, cycle through the 11 backlight modes using the side buttons, and confirm each of the seven colours appears; the four sequential LEDs will illuminate during the RPM alarm test.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
