We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel pneumatic ball valve with silver actuator and pilot solenoid

Dynaquip Controls

Dynaquip Controls PHS23AJSO23A 1/2" FNPT 316 Stainless Steel Pneumatic Ball Valve Trap

SKU CH-BMR7-46XW5 MPN PHS23AJSO23A

Pneumatically actuated 316 stainless steel ball valve with 115V AC pilot solenoid, 1000 psi operating pressure and fail-closed safety

  • TypeDrain Components
  • MaterialHAWA
  • Pneumatically actuated for automated flow control
  • 316 stainless steel ball resists corrosion
  • Full-port design maintains unrestricted flow
  • 1,000 psi operating pressure handles demanding systems
  • 115 V AC pilot solenoid included for direct wiring

Dynaquip 1/2" FNPT Stainless Ball Valve

This pneumatically actuated two-way ball valve uses a 316 stainless steel ball and body for corrosion resistance. The full-port design allows unrestricted flow in a straight body style. A 115V AC pilot solenoid is included for direct electrical control.

Replaces Manual or Solenoid-Only Drains

The air-to-spring actuator provides fail-closed safety without continuous air pressure. Upgrading is worthwhile when a process demands automatic shut-off on power or air loss. The 150 psi steam rating covers typical condensate return lines.

Sustained Operation at 1000 psi

The valve maintains its normally closed position under full operating pressure during extended cycles. Spring return action ensures consistent sealing without actuator fatigue. The 316 stainless construction resists wear from repeated high-pressure seating.

Highlights

  • Pneumatically actuated for automated flow control
  • 316 stainless steel ball resists corrosion
  • Full-port design maintains unrestricted flow
  • 1,000 psi operating pressure handles demanding systems
  • 115 V AC pilot solenoid included for direct wiring

Specifications

TypeDrain Components
MaterialHAWA
BrandDynaquip Controls
ModelPHS23AJSO23A

Questions about this item

What size female NPT threads does the 1/2" valve body require for piping?

The valve body uses 1/2 inch female NPT threads for inlet and outlet connections.

How is the included 115V AC pilot solenoid wired to the air-to-spring actuator?

The solenoid mounts directly on the actuator and is energised to open the valve; de-energising lets the spring return it to the normally closed position.

When should the 316 stainless steel ball and seats be inspected or replaced under 1,000 psi service?

Inspect ball and seats annually or after any pressure spike above 1,000 psi; replace if leakage exceeds the allowable seat leakage class.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.