We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent electronic ball valve with stainless steel body and actuator housing

Dynaquip Controls

Dynaquip Controls Electronic Ball Valve 1/4" FNPT 316 Stainless Steel 115V AC IP66 2.5s Cycle

SKU CH-9X8P-K9277

Electrically actuated two-way ball valve in 316 stainless steel with PTFE and FKM seals, rated to 1,000 psi, 115 V AC, IP66 enclosure, 2.5 s cycle time and manual override

  • ColorTransparent
  • Electrically actuated for automated flow control
  • 316 stainless steel ball resists corrosion
  • IP66 enclosure protects against dust and water
  • 5 second cycle time enables fast response
  • Manual override with position indicator allows local operation

Electronic Ball Valve for Industrial Fluid Control

The Dynaquip Controls valve uses a 316 stainless steel ball and PTFE or RPTFE seats to handle water, oil or compatible chemicals up to 1,000 psi. Its 115V AC actuator rotates 90 degrees in 2.5 seconds and holds the last position on power loss.

Two-Piece Body with IP66 Actuator

The straight-pattern two-piece construction simplifies inline installation on 1/4" FNPT pipework. A manual override and visual position indicator let technicians operate or verify status without removing the cover, while the IP66 rating protects the actuator from dust and heavy wash-down.

Thermal Overload Protection and Low Power Draw

Built-in thermal overload protection prevents actuator damage during extended cycles or stalled conditions. The unit draws only momentary current during the 2.5-second stroke and consumes negligible power while holding position, keeping enclosure temperatures low and operating noise minimal.

Highlights

  • Electrically actuated for automated flow control
  • 316 stainless steel ball resists corrosion
  • IP66 enclosure protects against dust and water
  • 5 second cycle time enables fast response
  • Manual override with position indicator allows local operation

Specifications

ColorTransparent
BrandDYNAQUIP CONTROLS

Questions about this item

What does the IP66 rating protect the 115V AC actuator against?

The IP66 rating means the actuator enclosure is dust-tight and protected against powerful water jets from any direction.

What pipe thread does the 1/4" FNPT valve body require for installation?

The valve body has 1/4 inch female NPT threads, so it needs a matching male NPT pipe or fitting for a sealed connection.

How do you wire the 115V AC actuator, and what step is often missed?

Connect line, neutral and ground to the actuator terminals per the wiring diagram; the step often missed is securing the cable gland to maintain the IP66 seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.