We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Dynaquip Controls

Dynaquip Controls E3S28AJE07 2 in FNPT stainless steel electronic ball valve 2 way trap

SKU CH-4620-GRKZ3

Electrically actuated two-way stainless steel ball valve with 115 V AC operation and IP66 protection

  • ColorTransparent
  • Electrically actuated for remote flow control
  • 316 stainless steel ball resists corrosion
  • IP66 rating protects against dust and water jets
  • Auxiliary limit switch and position indicator simplify monitoring
  • Manual override enables operation during power loss

2 in FNPT Stainless Ball Valve

This electrically actuated two-way ball valve uses a 316 stainless steel ball and a three-piece body with female NPT connections. It operates on 115V AC power and carries an IP66 rating for dust and water protection. The unit suits industrial fluid control where corrosion resistance and remote actuation are required.

1000 psi Pressure Limit

The valve handles a maximum operating pressure of 1000 psi with RPTFE seats and PTFE and FKM seals. Actuation travels 90 degrees in 27 seconds and fails in the last position if power is lost. Auxiliary limit switches, manual override and a position indicator are built into the actuator.

Two-Way Straight Flow Path

The straight-pattern body directs flow in a simple on-off mode without diverting or mixing ports. Three-piece construction allows inline maintenance without removing the valve from the pipeline. Buyers needing multi-port diversion, higher cycle speeds or a different voltage will need another valve type.

Highlights

  • Electrically actuated for remote flow control
  • 316 stainless steel ball resists corrosion
  • IP66 rating protects against dust and water jets
  • Auxiliary limit switch and position indicator simplify monitoring
  • Manual override enables operation during power loss

Specifications

ColorTransparent
BrandDYNAQUIP CONTROLS

Questions about this item

Should I choose the 2 in FNPT version or is another size available?

The valve is supplied in a 2 in FNPT stainless steel configuration; no other sizes or end connections are listed for this model.

What does the 1,000 psi operating pressure mean once the valve is installed in a system?

It indicates the maximum pressure the valve can handle during normal operation, so the piping and pump must stay at or below that limit.

How does the 115V AC supply and IP66 rating affect wiring and environment limits?

The actuator runs on 115V AC and the IP66 enclosure protects against dust and powerful water jets, allowing installation in wet or dirty areas.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.