Dynaquip Controls
Dynaquip Controls E3S24AJE23 3/4" FNPT 120V AC electronic ball valve
Electrically actuated 316 stainless-steel ball valve, 120 V AC, IP66, 2.5 s cycle with manual override and thermal overload protection
- ColorTransparent
- Electrically actuated two-way ball valve with 90-degree operation
- 316 stainless steel ball handles up to 1,000 psi operating pressure
- 120V AC powered actuator cycles 90 degrees in 2.5 seconds
- IP66 rated enclosure protects against dust and powerful water jets
- Three-piece valve construction includes manual override and thermal overload protection
Electrically Actuated Ball Valve
This electrically actuated two-way ball valve uses a 316 stainless steel ball and a three-piece body. It operates on 120V AC power and carries an IP66 rating for dust and water resistance. The unit suits plumbing systems needing automated on-off control.
Straight Three-Piece Valve Body
The straight three-piece construction allows the valve to fit into existing 3/4 inch FNPT piping without special adapters. A manual override lets operators cycle the valve during power loss. Thermal overload protection guards the actuator against sustained stall conditions.
1000 psi Pressure Rating
Rated for 1000 psi operating pressure, the valve handles high-pressure water or compatible fluids with RPTFE seats and PTFE and FKM seals. The actuator completes a 90 degree stroke in 2.5 seconds and fails in the last position if power is removed. Buyers needing faster cycle times or a spring-return fail-safe should consider other models.
Highlights
- Electrically actuated two-way ball valve with 90-degree operation
- 316 stainless steel ball handles up to 1,000 psi operating pressure
- 120V AC powered actuator cycles 90 degrees in 2.5 seconds
- IP66 rated enclosure protects against dust and powerful water jets
- Three-piece valve construction includes manual override and thermal overload protection
Specifications
| Color | Transparent |
|---|---|
| Brand | DYNAQUIP CONTROLS |
Questions about this item
What is the maximum operating pressure this valve can handle continuously?
The valve is rated for a maximum operating pressure of 1,000 psi under sustained use.
How much heat and noise does the actuator produce during all-day operation?
The actuator includes thermal overload protection and cycles in 2.5 seconds, limiting heat buildup and keeping noise minimal during continuous duty.
What piping and power supply must already be in place for installation?
You need a 3/4 inch FNPT connection and a 120V AC power source to operate the valve.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



