Dynabrade Products
Dynabrade Products 59014 pneumatic components power
A 0.25 hp random orbital sander with a 6 in pad, 3/8 in orbit and 12,000 RPM free speed for industrial finishing
- 25 hp motor delivers 12,000 RPM free speed for fast material removal
- 3/8 in orbit diameter produces smooth random orbital finish on 6 in pads
- Vacuum-ready design captures dust at source for cleaner work area
- Rear exhaust directs airflow away from operator and workpiece
- 5 CFM average consumption at 90 psi suits standard shop compressors
Six-Inch Random Orbital Sander
The Dynabrade 59014 is a palm-style pneumatic sander built for industrial duty. It runs on a 0.25 hp motor with a 3/8 inch orbit diameter and a free speed of 12,000 RPM. The tool accepts a six-inch vinyl or hook-face pad and uses a 5/16-24 spindle. A lever throttle controls the fixed-speed operation.
Upgrade From Non-Vacuum Sanders
This model includes vacuum capability to extract dust at the source, reducing airborne particles and keeping the work surface visible. The jump is worth it when moving from a non-vacuum orbital sander to a system that supports cleaner air and less rework. It consumes 3.5 CFM average during a 15-second run and 14.0 CFM at full load, requiring 90 psi at a 1/4 inch NPT inlet.
Technicians Needing Dust Extraction
The sander suits technicians who need a compact, rear-exhaust tool with integrated vacuum for finish prep on flat panels. Its 7 3/4 inch overall length fits tight areas. Buyers who need variable speed control or a larger orbit for aggressive stock removal should look at something else. A minimum 1/4 inch hose is required for proper airflow.
Highlights
- 25 hp motor delivers 12,000 RPM free speed for fast material removal
- 3/8 in orbit diameter produces smooth random orbital finish on 6 in pads
- Vacuum-ready design captures dust at source for cleaner work area
- Rear exhaust directs airflow away from operator and workpiece
- 5 CFM average consumption at 90 psi suits standard shop compressors
Specifications
| Brand | DYNABRADE |
|---|
Questions about this item
What size pad and spindle does the 59014 sander use?
The sander takes a 6 in pad with a 5/16 in.-24 spindle thread.
What air supply does the 59014 need to run correctly?
Connect a 1/4 in NPT inlet to a 1/4 in minimum hose at 90 psi; the tool draws 3.5 CFM average and 14.0 CFM at full load.
How often should the 59014 be lubricated and what wears out first?
Add a few drops of air-tool oil into the inlet each day of use; the rear exhaust muffler and throttle lever are the parts most likely to need replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
