Dynabrade Products
Dynabrade Products 54363 Right-Angle Air Die Grinder 18k RPM 0.7 HP 41 CFM
Right-angle air die grinder spins at 18,000 RPM with 0.7 hp and 41 CFM for tight-space grinding
- TypeGrinders
- MaterialComposite
- Right-angle design reaches confined spaces
- Gearless mechanism reduces maintenance needs
- 7 HP motor delivers 18,000 RPM free speed
- Composite housing keeps the tool lightweight
- Rear exhaust directs airflow away from the workpiece
Right-Angle Air Die Grinder
The Dynabrade 54363 is a right-angle air die grinder built for metal fabrication, deburring and finishing tasks in professional workshops. Its 0.7 HP motor delivers 18,000 RPM free speed for fast material removal on steel, aluminium and composites. The compact head reaches confined areas where straight grinders cannot fit. Operators running high-volume production lines will appreciate the consistent power delivery.
Composite Housing and Rear Exhaust
A composite handle reduces vibration transfer and keeps the tool light during extended use. The rear exhaust directs airflow away from the workpiece and operator, keeping the work area clear of debris. A 1/4 inch collet accepts standard carbide burrs and mounted points without adapters. The 1/4 inch NPT air inlet and 1/4 inch minimum hose size simplify connection to existing shop airlines. Gearless construction minimises maintenance downtime.
Air Consumption and Pressure Requirements
At full load the grinder draws 41.0 CFM, dropping to an average of 10.25 CFM during a typical 15 second cycle. Continuous operation requires a compressor capable of sustaining 90 psi at the tool inlet. Shops with undersized air systems will see pressure drop and reduced speed under heavy cuts. The 11 1/4 inch overall length and 2 29/32 inch right-angle head height limit access in extremely tight cavities.
Highlights
- Right-angle design reaches confined spaces
- Gearless mechanism reduces maintenance needs
- 7 HP motor delivers 18,000 RPM free speed
- Composite housing keeps the tool lightweight
- Rear exhaust directs airflow away from the workpiece
Specifications
| Type | Grinders |
|---|---|
| Brand | Dynabrade |
| Model | 54363 |
| Material | Composite |
Questions about this item
What does the 1/4 in NPT air inlet mean for airflow at 90 psi?
The 1/4 in NPT inlet feeds the motor at 90 psi, delivering 41.0 CFM at full load and an average of 10.25 CFM over a 15 second run.
What clearance does the 2 29/32 in right-angle head and 11 1/4 in overall length need?
The right-angle head measures 2 29/32 in and the tool stretches 11 1/4 in end to end, so allow at least that much space behind the workpiece.
How do I connect the 1/4 in NPT inlet without leaks?
Wrap the male fitting threads with PTFE tape, thread it into the 1/4 in NPT inlet until snug, then tighten one more turn; use a 1/4 in minimum hose rated for 90 psi.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
