We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular NiMH battery pack with screw-mount tabs, green wrapper, 88 by 26 by 9 mm

DUSLAN

DUSLAN V200H-3ME 3.6V 200mAh NiMH battery

SKU CH-RYA0-TEVHS

A 3.6V 200mAh NiMH battery pack with screw-mount tabs for Mitsubishi MR-S11 and MR-S12 servo amplifiers

  • Battery TypeBattery Pack
  • Reliable backup power for PLC systems
  • 6 V NiMH chemistry delivers stable voltage
  • 200 mAh capacity supports memory retention
  • Screw-mount tabs enable secure installation
  • Compact 26 mm × 88 mm × 9 mm form fits tight enclosures

Industrial NiMH Battery Pack for Mitsubishi PLCs

This DUSLAN V200H-3ME is a 3.6V 200mAh nickel-metal hydride battery pack built as a direct replacement for Mitsubishi PLC backup power. It fits MR-S11 and MR-S12 series servo amplifiers and matches part numbers including GB250H-3F, GB250-3FB2 and 3GB170-F. The screw-mount tabs allow secure installation inside control cabinets.

Screw Mount Tabs Simplify Cabinet Installation

The pack uses screw-mount termination tabs rather than solder leads or pressure contacts. This lets technicians fasten the battery directly to the amplifier’s mounting points without specialised tooling. The 26 mm width, 88 mm length and 9 mm height match the original Mitsubishi C0307 and C0308 form factor so no bracket modification is needed.

NiMH Chemistry Limits High-Current Pulse

Nickel-metal hydride chemistry at 200mAh capacity suits low-drain memory backup but cannot deliver the peak currents required by motor-brake circuits or emergency-stop solenoids. The 3.6V nominal voltage is fixed by the cell configuration and cannot be paralleled for higher voltage rails. Builders needing extended runtime or higher pulse capability must select a different chemistry.

Highlights

  • Reliable backup power for PLC systems
  • 6 V NiMH chemistry delivers stable voltage
  • 200 mAh capacity supports memory retention
  • Screw-mount tabs enable secure installation
  • Compact 26 mm × 88 mm × 9 mm form fits tight enclosures

Specifications

Battery TypeBattery Pack

Questions about this item

When will the 3.6 V 200 mAh NiMH pack need replacement in a Mitsubishi MR-S11 or MR-S12 servo amplifier?

Typical service life in those amplifiers is several years; replace when the pack no longer holds enough charge to maintain encoder memory during power-off periods.

What is the first limit reached when the V200H-3ME runs continuously in a servo amplifier?

The 200 mAh capacity is the limiting factor; once stored energy is depleted the amplifier loses backup power for position data.

How much heat does the 90 g battery generate during all-day operation in a Mitsubishi GB250H-3F compatible system?

NiMH chemistry at this capacity produces negligible heat; the pack stays near ambient temperature during normal backup duty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.