We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six paper-wrapped Sub-C NiCd cells with solder tabs, 22 mm diameter, 43 mm length

DUSLAN

DUSLAN Sub-C 2200 mAh NiCd 6-pack tabs paper wrapped

SKU CH-68CG-AE3RK

Six Sub-C NiCd cells deliver 2200 mAh at 1.2 V with solder tabs, paper sleeves and up to 500 recharge cycles

  • 2200 mAh capacity powers high-drain tools longer
  • Nickel Cadmium chemistry handles heavy discharge without damage
  • Solder tabs on both ends enable secure pack builds
  • Paper wrap protects cells during assembly and use
  • Rated for up to 500 recharge cycles for lasting value

Pack of six Sub-C cells

This pack contains six Sub-C nickel-cadmium cells, each rated at 2200 mAh and 1.2 volts. They are designed for equipment that requires high-discharge performance and a reliable service life. The cells use a paper-wrapped sleeve and are sold in new condition. They are not a substitute for standard C alkaline button-top batteries.

Tabbed terminals for permanent wiring

Each cell measures 43 mm in length and 22 mm in diameter, with tabs on both ends for soldered connections. This terminal style suits custom pack building or direct installation inside devices such as cordless tools, emergency lighting or RC models. The paper wrap provides basic insulation but no rigid casing. Builders must add their own strain relief and protection.

NiCd chemistry limits

Nickel-cadmium chemistry allows recharging up to 500 cycles and handles high current draw well. However, it suffers from memory effect if not fully discharged before recharging. Cadmium content requires proper recycling at end of life. The lower energy density means larger packs than modern lithium alternatives for the same capacity.

Highlights

  • 2200 mAh capacity powers high-drain tools longer
  • Nickel Cadmium chemistry handles heavy discharge without damage
  • Solder tabs on both ends enable secure pack builds
  • Paper wrap protects cells during assembly and use
  • Rated for up to 500 recharge cycles for lasting value

Specifications

No published specifications for this item yet.

Questions about this item

What voltage and capacity does each Sub-C NiCd cell deliver?

Each cell is rated at 1.2 Volt and 2200 mAh, giving a nominal 1.2 V output with 2.2 Ah of charge capacity.

What are the exact dimensions of these paper-wrapped Sub-C cells?

They measure 43 mm in length and 22 mm in diameter (1.69" × 0.87"), so verify your battery compartment matches before ordering.

How do I solder the tabs without damaging the NiCd chemistry?

Use a temperature-controlled iron at the lowest effective heat, apply flux, and solder each tab in under three seconds to avoid overheating the 1.2 V cell.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.