DUSLAN
DUSLAN SB9758T 3 V lithium standard battery
3 V lithium cell with wire leads and connector backs up memory in Allen-Bradley PLC-5 and 1785 controllers across a -60 °C to +85 °C range
- Battery TypeSB9758T
- Reliable PLC memory backup with 1800 mAh lithium cell
- Wide operating range from -60 °C to +85 °C
- Direct fit for Allen-Bradley PLC-5 and 1785 series controllers
- Compact 17 mm diameter by 46 mm length design
- Secure wire-lead connector ensures stable installation
Replacement battery for Allen-Bradley PLCs
The DUSLAN SB9758T is a 3 V lithium cell rated at 1800 mAh with wire leads and a connector. It is built to keep memory alive in Allen-Bradley PLC-5 and 1785 series programmable logic controllers and industrial computers. The unit is supplied new and matches the original 1770-XYC part specification.
Suits maintenance on listed PLC models
This battery fits the PLC-5/11, PLC-5/20, PLC-5/30, PLC-5/40 and PLC-5/60 families plus the 1785-L11B, 1785-L20B, 1785-L30B, 1785-L40B, 1785-L60B, 1785-L80B and related 1785-L16B, 1785-L26B, 1785-L36B, 1785-L46B, 1785-L66B, 1785-L86B and E and C variants. It also covers 1771-DMC1 and 1771-DMC4 modules. Buyers needing a different voltage, chemistry or form factor should look elsewhere.
1800 mAh capacity decides runtime
The 1800 mAh rating determines how long the processor retains its program and data during power-off periods. The cell operates from -60 °C to +85 °C and measures 17 mm diameter by 46 mm length with a typical weight of 54 g. Verify the part number against your controller documentation before ordering.
Highlights
- Reliable PLC memory backup with 1800 mAh lithium cell
- Wide operating range from -60 °C to +85 °C
- Direct fit for Allen-Bradley PLC-5 and 1785 series controllers
- Compact 17 mm diameter by 46 mm length design
- Secure wire-lead connector ensures stable installation
Specifications
| Battery Type | SB9758T |
|---|
Questions about this item
How do I install the SB9758T battery in my PLC-5 controller?
Power down the controller, open the battery compartment, unplug the old connector, attach the new wire-lead connector matching the keyed orientation, close the compartment, and restore power.
When will the 1800 mAh lithium cell need replacement?
Typical service life is several years; replace when the controller reports low-battery voltage or after the manufacturer's recommended interval for your PLC-5 model.
What is the upper temperature limit for continuous operation?
The battery is rated to +85 °C; sustained exposure above this temperature will degrade capacity and shorten usable life first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



